When we need semi-rigid coax, we buy it from Micro-Coax
(http://www.micro-coax.com/). They don't show 35
ohm / 0.25" OD available but they show 35 ohm / 0.141" OD
available. You could also peruse the manufacturers &
distributors at the RF Cafe
(http://www.rfcafe.com/vendors/vendor-links.htm).
vy 73,
Bryan WA7PRC
Mike G8TIC queried:
> To make this work at the power levels involved I
> need to source some 35R and 50R 0.25" semi-flexible
> PTFE coax - the stuff with a solder tinned outer
> that can be 'worked' into shape and soldered in to
> place.
Mike G8TIC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|