Amps
[Top] [All Lists]

Re: [Amps] Supply question

To: "'Rob Atkinson'" <ranchorobbo@gmail.com>, <amps@contesting.com>
Subject: Re: [Amps] Supply question
From: "Gary Schafer" <garyschafer@comcast.net>
Reply-to: garyschafer@comcast.net
Date: Wed, 20 Jul 2011 12:01:11 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
With 3500 volts @ 890 watts PEP out per tube 3rd order IM products are -40
db with respect to one of two tones. That's -46 db the way radio
manufacturers spec IM. Pretty darn good!
At 2500 volts 3rd order IM is -33db. Per Eimac spec sheet. Much better than
most radios today.

73
Gary  K4FMX

> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
> On Behalf Of Rob Atkinson
> Sent: Wednesday, July 20, 2011 11:16 AM
> To: amps@contesting.com
> Subject: Re: [Amps] Supply question
> 
> I understand that with 3-500 the 3rd order IMD gets pretty lousy when
> the Ep gets up there much above 3 KV.
> 
> I also had some idea you get a much bigger chance of arcs in the tube
> if you push the Ep way up there near the limit.
> 
> comments?
> 
> 73
> 
> Rob
> K5UJ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>