They are good for high current, but not so much for high voltage. I replaced
one in a
friend's 4-1000A amplifier after it was damaged by corona-induced arcing. The
amp was
running at 3600v.
On 2/6/2012 5:41 AM, Carl wrote:
> Its fine at that low power, just give it a good dishwasher cleaning to get
> rid of 70 years of gunk on the ceramic.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "John Finner"<finnerjf@att.net>
> To:<amps@contesting.com>
> Sent: Sunday, February 05, 2012 10:24 PM
> Subject: [Amps] BC-375E Switch
>
>
>> How stout is the BC-375E switch? Is it suitable for band switch use in my
>> 3 4CX300A tube amp at 1800 watts input?
>>
>> John WA4EPI
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|