A pair of 4-400A's is not enough to plate modulate a 3cx10000A at full input.
I bet it is a one-bander (and not 160 meters, either)!
On 4/5/2012 10:38 AM, Randall, Randy wrote:
> Sounds like a monster!
>
> Randy AB9GO
>
> Randy E. Randall AB9GO Network Engineer UC Health Randy.Randall@UCHealth.com
> Phone
> 513-585-7146 Fax 513-585-7159
>
> Ham Radio Amp - $8500 (Louisville KY)
>
> Custom Large Home Brew HF With Complete Remote Control Unit. Plate Modulated
> by 4-400a
> main final transmitter tube 8160 Aka 3CX10000-a7 Single Phase 240 " If you
> don't know
> what size breaker you need then do not rep lie to this ad" must pick up at
> shop can
> show full output into dummy load on site. All The Iron Can Be Removed Before
> Transit Or
> fork lift is there to load Completely Documented on Build By E.E And M.E.
> Built To
> Last. Soft Start / Time Delayed /Dummy Proof / Fully Auto. Its A Must See
> Thing. This
> Is Not Just for Any One. Receipts On Build Totaling $14.800.00 Not Including
> Labor
> Works Great At Legal Limit on AM& SSB With Very Little Drive. It Has 4 inter
> locks and
> Ground Fault. " To prevent Electrocution" If this unit is not operated
> Properly and
> tampered with by a UNSKILLED Tech folks " Death Will be The in Results " This
> is not a
> toy.
>
> http://louisville.craigslist.org/ele/2941727678.html
>
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|