Well, at least the ad doesn't say the amp is for 11 meters.
> Date: Thu, 5 Apr 2012 13:04:30 -0500
> From: email@example.com
> To: Randy.Randall@uchealth.com
> CC: Amps@contesting.com
> Subject: Re: [Amps] FWD: Ham Radio Amp - $8500 (Louisville Ky) 3CX10000-a7
> Let's see....would you seriously hand over $8500 to someone who:
> Can't write a grammatically correct advertisement
> Says he has an RF power amp but wait....it is "plate modulated by a 4-400"
> supposedly employs a 10KW plate dissipation tube but runs on single
> phase...with ad copy loaded with all sorts of put-downs disguised as
> warnings obviously intended to appeal to those who have more ego than
> my answer would be 10-4 good buddy
> On Thu, Apr 5, 2012 at 12:38 PM, Randall, Randy
> <Randy.Randall@uchealth.com> wrote:
> > Sounds like a monster!
> > Randy AB9GO
> > Randy E. Randall AB9GO
> > Network Engineer
> > UC Health
> > Randy.Randall@UCHealth.com
> > Phone 513-585-7146
> > Fax 513-585-7159
> > Ham Radio Amp - $8500 (Louisville KY)
> > Custom Large Home Brew HF With Complete Remote Control Unit. Plate
> > Modulated by 4-400a main final transmitter tube 8160 Aka 3CX10000-a7 Single
> > Phase 240 " If you don't know what size breaker you need then do not rep
> > lie to this ad"
> > must pick up at shop can show full output into dummy load on site. All The
> > Iron Can Be Removed Before Transit Or fork lift is there to load Completely
> > Documented on Build By E.E And M.E.
> > Built To Last. Soft Start / Time Delayed /Dummy Proof / Fully Auto. Its A
> > Must See Thing. This Is Not Just for Any One. Receipts On Build Totaling
> > $14.800.00 Not Including Labor
> > Works Great At Legal Limit on AM & SSB With Very Little Drive. It Has 4
> > inter locks and Ground Fault. " To prevent Electrocution" If this unit is
> > not operated Properly and tampered with by a UNSKILLED
> > Tech folks " Death Will be The in Results " This is not a toy.
> Amps mailing list
Amps mailing list