Unless you use an exact replacement, replace both diodes. Accuracy wont
suffer but sensitivity will with silicon.
Carl
KM1H
----- Original Message -----
From: "Al Kozakiewicz" <akozak@hourglass.com>
To: "RAY FRIESS" <rayfrijr@msn.com>; <gzook@yahoo.com>;
<amps@contesting.com>; "boatanchors" <boatanchors@mailman.qth.net>
Sent: Friday, May 04, 2012 10:58 AM
Subject: Re: [Amps] SB 200 problem
> No, at least not if you want any kind of accuracy. Germanium diodes have
> a nominal forward biased voltage drop of about 0.3 volts - silicon is 0.7.
>
> Al
> AB2ZY
>
> ________________________________________
> From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf
> Of RAY FRIESS [rayfrijr@msn.com]
> Sent: Friday, May 04, 2012 10:57 AM
> To: gzook@yahoo.com; amps@contesting.com; boatanchors
> Subject: Re: [Amps] SB 200 problem
>
> If it turns out to be a bad diode, and I cant gind a germanium, can I use
> a regular power supply type diode to replace it? Date: Fri, 4 May 2012
> 07:55:45 -0700
> From: gzook@yahoo.com
> Subject: Re: [Amps] SB 200 problem
> To: rayfrijr@msn.com; amps@contesting.com; boatanchors@mailman.qth.net
>
> Check the germanium diode that provides the voltage for the "forward" or,
> in this case, the power output, indication. There are 2-diodes, 1 for
> forward and 1 for reverse (SWR position). It sounds like the forward
> diode is bad. Very common!
> Also, clean the meter switch. Glen, K9STH
>
> Website: http://k9sth.com
> From: RAY FRIESS <rayfrijr@msn.com>
> To: amps@contesting.com; boatanchors
> <boatanchors@mailman.qth.net>; FLBOATANCHORS
> <flboatanchors@yahoogroups.com>
> Sent: Friday, May 4, 2012 9:30 AM
> Subject: [Amps] SB 200 problem
>
>
>
>
>
>
> I have a Heath SB 200 amp that is working fine with one exception. The
> meter is not functioning in the power out position.It reads fine for high
> voltage, grid, and SWR functions, just not for power output. I have to
> use an external wattmeter to tuneupand check power output. I thought it
> might be just my amp until the other day when I was at a ham friends of
> mine, and he told me he had the same problemwith his SB 200. Anyone else
> had this problem and know what to do to fix it?
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2411/4977 - Release Date: 05/04/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|