Amps
[Top] [All Lists]

[Amps] Silicone hose from Flex Technologies

To: "Amps Reflector" <amps@contesting.com>
Subject: [Amps] Silicone hose from Flex Technologies
From: "Paul Hewitt" <wd7s@earthlink.net>
Reply-to: Paul Hewitt <wd7s@earthlink.net>
Date: Fri, 20 Jul 2012 10:19:29 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Greetings
A few months ago someone posted the link for this company after using some 
of their silicone hose for a chimney(s).  I bought some of the 2.5 inch hose 
for a pair of 3cx800's I have.  It is a polyester reinforced product. 
Unfortunately the hose did not survive the microwave test I gave it.  Two 
minutes in a 1KW microwave gets it so hot you can't touch it for ten 
minutes.  It might be OK for HF but above that I would be cautious.  For 
what it's worth before you spend the money.

Paul


PAUL HEWITT
WD7S PRODUCTIONS
QRO HOMEBREW COMPONENTS
http://home.earthlink.net/~wd7s




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>