To: | amps@contesting.com |
---|---|
Subject: | [Amps] Lowering the voltage on a transformer |
From: | Peter <pc2a@pi4cc.nl> |
Date: | Thu, 02 Aug 2012 16:48:21 +0200 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Hi I just get my hands on a nice transformer but the volttage is too high. The transformer is rated 4000/4500V 3800VA I like to remove some secondary windings to go to 2500-2600 V My question is: Do I need equaly remove the windings on both sides? 1 side holds the "0"while the other side have the 4000/4500V tape I have some pictures at : http://www.pi4cc.nl/temp/hsp/ Peter PC2A _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] 3CX1500A7/8877 vs el cheapo GS-35B, Roger |
---|---|
Next by Date: | Re: [Amps] Lowering the voltage on a transformer, Peter Voelpel |
Previous by Thread: | Re: [Amps] ferrite loaded plate chokes, Peter Voelpel |
Next by Thread: | Re: [Amps] Lowering the voltage on a transformer, Peter Voelpel |
Indexes: | [Date] [Thread] [Top] [All Lists] |