Just step it down on the primary with a 90V auto transformer before touching
the hv windings
73
Peter, DJ7WW
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Peter
Sent: Donnerstag, 2. August 2012 16:48
To: amps@contesting.com
Subject: [Amps] Lowering the voltage on a transformer
Hi
I just get my hands on a nice transformer but the volttage is too high.
The transformer is rated 4000/4500V 3800VA I like to remove some secondary
windings to go to 2500-2600 V
My question is:
Do I need equaly remove the windings on both sides?
1 side holds the "0"while the other side have the 4000/4500V tape
I have some pictures at : http://www.pi4cc.nl/temp/hsp/
Peter
PC2A
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|