Doesnt sound possible it the transformers are really as stated.
Carl
KM1H
----- Original Message -----
From: "Paul" <w8aef@q.com>
To: "'Carl'" <km1h@jeremy.mv.com>; "'Roger (K8RI)'"
<k8ri@rogerhalstead.com>; <amps@contesting.com>
Sent: Sunday, August 26, 2012 12:16 PM
Subject: RE: [Amps] Alpha 78
>> -----Original Message-----
>> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
>> Behalf Of Carl
>> Sent: Sunday, August 26, 2012 8:48 AM
>> To: Roger (K8RI); amps@contesting.com
>> Subject: Re: [Amps] Alpha 78
>>
>
>
>>
>> The EI transformer in the 76PA is not as rugged or as forgiving as the
>> Hypersil in the CA. Both are 3 holers and I know several who have run
>> them
>> at 1500W in a RTTY contest. Over several decades the EI in the PA has
>> failed
>> for some.
>
> Why does my stock transformer in my 76A deliver more current (less voltage
> sag) and higher output power into a dummy load than the CA hypersil
> transformer?
>
> de Paul, W8AEF
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2437/5225 - Release Date: 08/26/12
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|