Amps
[Top] [All Lists]

[Amps] 300 W single band mobile amp needed

To: <amps@contesting.com>
Subject: [Amps] 300 W single band mobile amp needed
From: "Jim Thomson" <jim.thom@telus.net>
Date: Sun, 7 Oct 2012 20:37:54 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Date: Sun, 7 Oct 2012 08:24:02 -0700 (PDT)
From: rick darwicki <n6pe@yahoo.com>
To: AMPS <amps@contesting.com>
Subject: [Amps] 300 W single band mobile amp needed
I have a friend that runs a motorcycle mobile on 20 Meters at about 100 watts. 
He is looking for a schematic/info/link for a simple no tune amp of about 300W 
that would just cover the SSB section of 20. Any help?

Thanks


Rick, N6PE

Going from 100 watts  to 300w  = exactly  4.77 db.    That’s nothing to sneeze 
at....and is enough to get the job done. 
The duty cycle on SSB is such that there is no way in hell your buddy is gonna 
fry his brains out on 20m band.
The average power is WAY too low... and so is the freq. 

Any mono band amp has some advantages, only ONE LP filter required.    Not only 
that, you then also don’t have to worry
about band switching various LP filters.  You just eliminated all the 
switching!     You also now have the luxury of designing the
combiner so it’s  100% optimized for 20m  band.     Then you get  max eff. 

Plan B might be to use a 11m  cb amp,  and install a  20M  LP filter into 
it..then retweak the bias a bit.

I would not worry about IMD  on any mobile amp.  With 300w pep,and a mobile 
ant,  you are not gonna be 
loud enough to anywhere  for anybody to start bitching about imd. 

To supplement your battery-alternator setup,  use a .5 to 1 farad cap across 
the 12 vdc buss.  The car stereo
guys use these caps all the time.  They work damn good too. No more lights 
blinking on heavy bass notes etc.
The 11m ops also use em  for mobile applications. 

Later.......  Jim  VE7RF

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>