I have the following HVPS items for sale. I would prefer to sell it as one
lot and it is priced that way.
Basler Electric T0210, BE16080 001 Plate transformer. 220VAC multi-tap
primary, output is @2930/3270/3660VAC depending on taps used at 220VAC
input. Conservatively rated at 1 amp CCS. Weights over 70 pounds and
approximately 10” X 8” X 8”.
SNC P6527 68711 8H choke. Rated at 1 amp CCS, @45 ohms, @20 pounds and 6” X
6” X 4.5”.
4- Varo VC80 8631 rectifiers, 8kV at 1 amp.
21- Nippon Chemi-Con 82D 9935L 1500uF 450VDC electrolytic.
2- Clarostat VK-160-W 50Kohm 160 watt ceramic wire wounds.
20 100Kohm 3 watt cap equalization resistors.
Carborvndum 885 SP220L, 22 ohm glitch resistor.
P&B P25P44D32P 25 amp 600volt contractor.
CSI 4N322TNP 6uF 4kVdc non-pcb oil capacitor.
100-Vishay BY228-TAP 3 amp 1.65kV SOD-64 avalanche rectifiers.
The 450V caps, Vishay rectifiers, 100K resistors (From Rich) are brand new.
They remainder are removed from military equipment that was never placed in
service. Opened the foil pouch myself.
It can be shipped but you probably don't want to pay the price for the
transformer. About 100 bucks to CA from here just for the transformer.
Guessing around $170.00 to ship it all to the west coast. All is located in
Ohio near the town of Zanesville, 43842.
$275.00 no arguing, cash or Pay Pal, to first reply.
Thanks for looking,
Paul
WD8OSU
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|