Amps
[Top] [All Lists]

Re: [Amps] HVPS Parts For Sale

To: Amps reflector <amps@contesting.com>
Subject: Re: [Amps] HVPS Parts For Sale
From: "Col. Paul E. Cater" <paulecater@gmail.com>
Date: Thu, 7 Feb 2013 17:26:17 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
This is sold----------

Paul
WD8OSU



On Wed, Feb 6, 2013 at 2:02 PM, Col. Paul E. Cater <paulecater@gmail.com>wrote:

> I have the following HVPS items for sale. I would prefer to sell it as one
> lot and it is priced that way.
>
> Basler Electric T0210, BE16080 001 Plate transformer. 220VAC multi-tap
> primary, output is @2930/3270/3660VAC depending on taps used at 220VAC
> input. Conservatively rated at 1 amp CCS. Weights over 70 pounds and
> approximately 10” X 8” X 8”.
>
> SNC P6527 68711 8H choke. Rated at 1 amp CCS, @45 ohms, @20 pounds and 6”
> X 6” X 4.5”.
>
> 4- Varo VC80 8631 rectifiers, 8kV at 1 amp.
>
> 21- Nippon Chemi-Con 82D 9935L 1500uF 450VDC electrolytic.
>
> 2- Clarostat VK-160-W 50Kohm 160 watt ceramic wire wounds.
>
> 20 100Kohm 3 watt cap equalization resistors.
>
> Carborvndum 885 SP220L, 22 ohm glitch resistor.
>
> P&B P25P44D32P 25 amp 600volt contractor.
>
> CSI 4N322TNP 6uF 4kVdc non-pcb oil capacitor.
>
> 100-Vishay BY228-TAP 3 amp 1.65kV SOD-64 avalanche rectifiers.
>
> The 450V caps, Vishay rectifiers, 100K resistors (From Rich) are brand
> new. They remainder are removed from military equipment that was never
> placed in service. Opened the foil pouch myself.
>
>  It can be shipped but you probably don't want to pay the price for the
> transformer. About 100 bucks to CA from here just for the transformer.
> Guessing around $170.00 to ship it all to the west coast. All is located in
> Ohio near the town of Zanesville, 43842.
>
>
>  $275.00 no arguing, cash or Pay Pal, to first reply.
>
> Thanks for looking,
>
> Paul
>
> WD8OSU
>
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>