Amps
[Top] [All Lists]

Re: [Amps] FW: Power factor correction on tube amps

To: "Roger (K8RI)" <k8ri@rogerhalstead.com>
Subject: Re: [Amps] FW: Power factor correction on tube amps
From: George <K4GVT@comcast.net>
Date: Sat, 09 Mar 2013 20:01:03 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Roger, as ISO9001 goes, if you write it, you follow it! I remember going through the certification process and questioning the legitimacy of a policy that allows for non-conforming product to be shipped. This really bothered me until I realized the documented steps in a given procedure could very well produce a "quality" product, (Ooooh that is not what the standard is for). Unfortunately it gives the manufacturer an opportunity to virtually write his own procedure and ship garbage and still be ISO compliant. Bottom line--if you really care, you could write a procedure that will ship only conforming
product and reject non-conforming items.

73,
George, K4GVT






On 3/9/2013 6:34 PM, Roger (K8RI) wrote:
On 3/9/2013 5:00 PM, Richard Solomon wrote:
That ISO program also made companies get rid of lots of perfectly good test
equipment.

That is an indication that the people trying for certification didn't really understand the ISO requirements. It is purely about documentation, nothing more and nothing less.

I found that most companies didn't understand that and wrote themselves into a corner. An expensive corner. As you say, for you it was a bonanza

73

Roger (K8RI)


 My shack and test benches are full of Tektronix, HP, EIP and
other such gems. When I retired to Arizona, I gave about half of it away before
leaving.

To me, ISO was a bonanza !!

73, Dick, W1KSZ

On Sat, Mar 9, 2013 at 2:30 PM, Bill Turner <dezrat1242@yahoo.com> wrote:
ORIGINAL MESSAGE:
On Sat, 09 Mar 2013 14:21:13 -0500, George wrote:

ISO9002 is not meant to be a quality program, simple put ISO9002 makes
sure that you do what your polices and procedures say with no regard to
quality.

REPLY:
No it doesn't. A company can qualify one day and ship junk the next. Or
later the same day.

That whole ISO thing is a scam put in place by gummints who want to create
work for their buddies. Bureaucratic nonsense.

The best assurance of quality products is a company that jealously guards
its reputation and will not tolerate shipping poor quality products.
Quality can not be imposed from outside.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>