Since the YC-156 has been referred to as having 3CX15000B7 internals then
the "never to exceed" 100ma average Ig on the spec sheet should hold true.
Carl
KM1H
----- Original Message -----
From: "Jim Thomson" <jim.thom@telus.net>
To: <amps@contesting.com>
Sent: Sunday, March 24, 2013 2:26 AM
Subject: [Amps] What is max grid current for YC-156 ??
A buddy just fired up his hb YC-156 today. So far, so good. What is the
max safe grid current for this tube ??
It has both electronic grid and plate current protection..which can both
be set to any value. The bias is also
fully adjustable, so zsac can also be set to any value. The B+ can be
set to 1/2 or full voltage.
Before the drive is increased, and or B+ is doubled in value, we need to
know asap, what max grid current is.
Thanks in advance.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2641/5699 - Release Date: 03/23/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|