Amps
[Top] [All Lists]

Re: [Amps] Plate choke explodes

To: "Amps" <amps@contesting.com>
Subject: Re: [Amps] Plate choke explodes
From: Bill Turner <dezrat1242@yahoo.com>
Date: Sat, 13 Apr 2013 14:25:32 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
ORIGINAL MESSAGE (may be snipped): 
On Sat, 13 Apr 2013 17:02:24 -0400, Carl wrote:

>
>Why not as it is rated at 1A CCS? It may not like it at 2500W out 
>however......
>Several HF amps use similar for their "VHF" choke.
>
>Carl
>KM1H

REPLY: 
You are overlooking resonance. The 1 amp rating will be FAR exceeded if the
tank circuit is ever mistuned, i.e., lightly loaded or accidentally
connected to the wrong antenna while driven at or near full power.

If you go back through the archives of this group, you will see the
admonition over and over to AVOID RESONANCES in the plate tank choke, both
series and parallel. 

The Ohmite Z-50 would be a good choice for filtering the HV lead or other
leads to keep RF out of the power supply on six meters, but not for a plate
choke. 

Bill, W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>