[Amps] odd problem with Yaesu Quadra vl-1000 amp, Chris Miller, 2013/04/30

• Re: [Amps] odd problem with Yaesu Quadra vl-1000 amp, Gary K9GS, 2013/04/30

[Amps] Soft tubes, k8leewmm, 2013/04/30

• Re: [Amps] Soft tubes, TexasRF, 2013/04/30

[Amps] Non-vacuum capacitor, Ian White, 2013/04/27

• Re: [Amps] Non-vacuum capacitor, Fuqua, Bill L, 2013/04/27
• Re: [Amps] Non-vacuum capacitor, Bill Turner, 2013/04/27
  • Re: [Amps] Non-vacuum capacitor, Ian White, 2013/04/27
    • Re: [Amps] Non-vacuum capacitor, Chris Wilson, 2013/04/27
    • Re: [Amps] Non-vacuum capacitor, Steve Bookout, 2013/04/29
    • Re: [Amps] Non-vacuum capacitor, Chris Wilson, 2013/04/29
    • Re: [Amps] Non-vacuum capacitor, Fuqua, Bill L, 2013/04/29

[Amps] TUBE REPLACEMENT, Bob Gibson, 2013/04/26

• Re: [Amps] tube replacement, Roy, 2013/04/28

[Amps] (no subject), TOMMY BEARD, 2013/04/26

• Re: [Amps] AADE LC meter, Vic K2VCO, 2013/04/26
• Re: [Amps] (no subject), Bill Turner, 2013/04/26

[Amps] Dentron Clippertion L 1 ohm 1 watt., johne tds.net, 2013/04/26

• Re: [Amps] Dentron Clippertion L 1 ohm 1 watt., Carl, 2013/04/26

[Amps] Need help with switch nomenclature, Charles Bibb - K5ZK, 2013/04/25

• Re: [Amps] Need help with switch nomenclature, Ron Youvan, 2013/04/25
  • Re: [Amps] Need help with switch nomenclature, Al Kozakiewicz, 2013/04/25
• Re: [Amps] Need help with switch nomenclature, Roger (K8RI), 2013/04/25
• Re: [Amps] Need help with switch nomenclature, TexasRF, 2013/04/25

[Amps] Measuring tank coil inductance, John Lyles, 2013/04/24

• Re: [Amps] Measuring tank coil inductance, Carl, 2013/04/24

[Amps] Solid state amp comparisons, Greg - ZL3IX, 2013/04/24

• Re: [Amps] Solid state amp comparisons, Al Kozakiewicz, 2013/04/24
• Re: [Amps] Solid state amp comparisons, Jeff Blaine, 2013/04/25
  • Re: [Amps] Solid state amp comparisons, Mark Beckwith, 2013/04/25

[Amps] SB-220 help, mike stokes, 2013/04/23

• Re: [Amps] SB-220 help, Carl, 2013/04/23

[Amps] Dentron Clippertion L band switch advice., johne tds.net, 2013/04/23

• Re: [Amps] Dentron Clippertion L band switch advice., Jim Hargrave, 2013/04/23

[Amps] Measuring tank coil inductance, Vic K2VCO, 2013/04/23

• Re: [Amps] Measuring tank coil inductance, Paul Baldock, 2013/04/23
• Re: [Amps] Measuring tank coil inductance, Bill Turner, 2013/04/23
• Re: [Amps] Measuring tank coil inductance, Chris Wilson, 2013/04/23
  • Re: [Amps] Measuring tank coil inductance, Bill Turner, 2013/04/23
    • Re: [Amps] Measuring tank coil inductance, Carl, 2013/04/23
    • Re: [Amps] Measuring tank coil inductance, David Kirkby, 2013/04/26
• Re: [Amps] Measuring tank coil inductance, Radio WC6W, 2013/04/25
  • Re: [Amps] Measuring tank coil inductance, Vic K2VCO, 2013/04/25
    • Re: [Amps] Measuring tank coil inductance, Bill Turner, 2013/04/25
    • Re: [Amps] Measuring tank coil inductance, Vic K2VCO, 2013/04/26
    • Re: [Amps] Measuring tank coil inductance, Bill Turner, 2013/04/26
    • Re: [Amps] Measuring tank coil inductance, Ian White, 2013/04/26
    • Re: [Amps] Measuring tank coil inductance, Vic K2VCO, 2013/04/26
• [Amps] Measuring tank coil inductance, Jim Thomson, 2013/04/24
• [Amps] Measuring tank coil inductance, Jim Thomson, 2013/04/25
  • Re: [Amps] Measuring tank coil inductance, Vic K2VCO, 2013/04/26
  • Re: [Amps] Measuring tank coil inductance, Bill Turner, 2013/04/26
• Re: [Amps] Measuring tank coil inductance, TexasRF, 2013/04/26
  • Re: [Amps] Measuring tank coil inductance, Vic K2VCO, 2013/04/28

[Amps] hf-2500 again, K1TTT, 2013/04/20

• Re: [Amps] hf-2500 again, TexasRF, 2013/04/20
  • Re: [Amps] hf-2500 again, K1TTT, 2013/04/20
  • Re: [Amps] hf-2500 again, K1TTT, 2013/04/21

[Amps] How to test an 8877 tube, Drax Felton, 2013/04/19

• Re: [Amps] How to test an 8877 tube, Jim Garland, 2013/04/19

[Amps] Great Stuff, rick darwicki, 2013/04/17

• Re: [Amps] Great Stuff, Ken Beals, 2013/04/17
  • Re: [Amps] Great Stuff, qrv@kd4e.com, 2013/04/17
    • Re: [Amps] Great Stuff, Ken Beals, 2013/04/17
• Re: [Amps] Great Stuff, Dugas, Jason A. (JSC-EP511), 2013/04/18

[Amps] 4CX1500B Price, Pete N4KW, 2013/04/17

• Re: [Amps] 4CX1500B Price, Roger, 2013/04/19

[Amps] HV resistor source, Doug Renwick, 2013/04/17

• Re: [Amps] HV resistor source, Carl, 2013/04/17

[Amps] HV resistor source, Drax Felton, 2013/04/16

• Re: [Amps] HV resistor source, Jim Garland, 2013/04/17
  • Re: [Amps] HV resistor source, Drax Felton, 2013/04/17
    • Re: [Amps] HV resistor source, Jeff Blaine, 2013/04/17
    • Re: [Amps] HV resistor source, KA4INM, 2013/04/17
  • Re: [Amps] HV resistor source, donroden, 2013/04/17
    • Re: [Amps] HV resistor source, Ian White, 2013/04/17
    • Re: [Amps] HV resistor source, donroden, 2013/04/17
    • Re: [Amps] HV resistor source, Ian White, 2013/04/17
  • Re: [Amps] HV resistor source, Bill Turner, 2013/04/17
• Re: [Amps] HV resistor source, Han Higasa, 2013/04/17
  • Re: [Amps] HV resistor source, Han Higasa, 2013/04/17
• Re: [Amps] HV resistor source, David Robbins, 2013/04/17
• Re: [Amps] HV resistor source, Colin Lamb, 2013/04/17
• [Amps] HV Resistor Source, John Lyles, 2013/04/17
  • Re: [Amps] HV Resistor Source, Carl, 2013/04/17
    • Re: [Amps] HV Resistor Source, John Lyles, 2013/04/18

[Amps] Instability update, Apr 16, N1BUG, 2013/04/16

• [Amps] Millen HV connectors - cable?, Drax Felton, 2013/04/16
  • Re: [Amps] Millen HV connectors - cable?, Jim Garland, 2013/04/16
    • Re: [Amps] Millen HV connectors - cable?, Bill Turner, 2013/04/16
    • Re: [Amps] Millen HV connectors - cable?, Jim Garland, 2013/04/16
    • Re: [Amps] Millen HV connectors - cable?, Hsu, 2013/04/17
    • Re: [Amps] Millen HV connectors - cable?, Hsu, 2013/04/17
• Re: [Amps] Instability update, Apr 16, Bill Turner, 2013/04/16
  • Re: [Amps] Instability update, Apr 16, N1BUG, 2013/04/17
• Re: [Amps] Instability update, Apr 16, Carl, 2013/04/17
  • Re: [Amps] Instability update, Apr 16, N1BUG, 2013/04/17

[Amps] Tuned input design / measurement questions, Chris Wilson, 2013/04/16

• Re: [Amps] Tuned input design / measurement questions, Vic K2VCO, 2013/04/16
  • Re: [Amps] Tuned input design / measurement questions, donroden, 2013/04/16
  • Re: [Amps] Tuned input design / measurement questions, Peter Voelpel, 2013/04/16
    • Re: [Amps] Tuned input design / measurement questions, Drax Felton, 2013/04/16
    • Re: [Amps] Tuned input design / measurement questions, Vic K2VCO, 2013/04/16
• Re: [Amps] Tuned input design / measurement questions, Chris Wilson, 2013/04/16
  • Re: [Amps] Tuned input design / measurement questions, Gary Schafer, 2013/04/16
• Re: [Amps] Tuned input design / measurement questions, Carl, 2013/04/16
• [Amps] Tuned input design / measurement questions, Jim Thomson, 2013/04/16
  • Re: [Amps] Tuned input design / measurement questions, Peter Voelpel, 2013/04/17

[Amps] Henry 2K Classic, Jim Hoge, 2013/04/14

• Re: [Amps] Henry 2K Classic, Dave Harmon, 2013/04/14
• [Amps] Henry 2K Classic, Donald Fox, 2013/04/14
  • Re: [Amps] Henry 2K Classic, k6ye, 2013/04/15

[Amps] Trade: 3 solid state HF amps for 1, qrv@kd4e.com, 2013/04/13

• Re: [Amps] Trade: 3 solid state HF amps for 1, Jim Brown, 2013/04/14
  • Re: [Amps] Trade: 3 solid state HF amps for 1, Chris Wilson, 2013/04/14
    • Re: [Amps] Trade: 3 solid state HF amps for 1, Jim Brown, 2013/04/14
    • Re: [Amps] Trade: 3 solid state HF amps for 1, Chris Wilson, 2013/04/23
  • Re: [Amps] Trade: 3 solid state HF amps for 1, qrv@kd4e.com, 2013/04/14

[Amps] Plate choke explodes, Drax Felton, 2013/04/13

• [Amps] Plate choke explodes, Drax Felton, 2013/04/12
  • Re: [Amps] Plate choke explodes, Eddy Swynar, 2013/04/12
    • Re: [Amps] Plate choke explodes, Drax Felton, 2013/04/12
    • Re: [Amps] Plate choke explodes, Bill Turner, 2013/04/12
  • Re: [Amps] Plate choke explodes, Han Higasa, 2013/04/12
• Re: [Amps] Plate choke explodes, Jim Garland, 2013/04/13
  • Re: [Amps] Plate choke explodes, Bill Turner, 2013/04/13
    • Re: [Amps] Plate choke explodes, Carl, 2013/04/13
• Re: [Amps] Plate choke explodes, Han Higasa, 2013/04/13
• Re: [Amps] Plate choke explodes, Dick NY1E, 2013/04/13
  • Re: [Amps] Plate choke explodes, Bill Turner, 2013/04/13
    • Re: [Amps] Plate choke explodes, Carl, 2013/04/13
    • Re: [Amps] Plate choke explodes, Bill Turner, 2013/04/13
    • Re: [Amps] Plate choke explodes, Carl, 2013/04/13
    • Re: [Amps] Plate choke explodes, Drax Felton, 2013/04/13
  • Re: [Amps] Plate choke explodes, Carl, 2013/04/13

[Amps] More instability problems, N1BUG, 2013/04/12

• Re: [Amps] More instability problems, Jim W7RY, 2013/04/12
  • Re: [Amps] More instability problems, N1BUG, 2013/04/12
    • Re: [Amps] More instability problems, Zev Darack, 2013/04/12
    • Re: [Amps] More instability problems, N1BUG, 2013/04/12
    • Re: [Amps] More instability problems, Vic K2VCO, 2013/04/12
    • Re: [Amps] More instability problems, Gary Schafer, 2013/04/12
• Re: [Amps] More instability problems, N1BUG, 2013/04/16
  • Re: [Amps] More instability problems, Bill Turner, 2013/04/16
  • Re: [Amps] More instability problems, Vic K2VCO, 2013/04/16
    • Re: [Amps] More instability problems, N1BUG, 2013/04/16
    • Re: [Amps] More instability problems, Jim W7RY, 2013/04/16
    • Re: [Amps] More instability problems, N1BUG, 2013/04/16
    • Re: [Amps] More instability problems, Jim W7RY, 2013/04/16
  • Re: [Amps] More instability problems, Eddy Swynar, 2013/04/16

[Amps] SB-200 Repair?, Bob Arenella, 2013/04/12

• Re: [Amps] SB-200 Repair?, Randall, Randy, 2013/04/12

[TenTec] Fw: Need Caps for Titan II Please, Bob Good, 2013/04/11

• Re: [Amps] Fw: Need Caps for Titan II Please, Rob Atkinson, 2013/04/11

[Amps] Look at this Custom 10kW Amp, Jim Thomson, 2013/04/11

• Re: [Amps] Look at this Custom 10kW Amp, donroden, 2013/04/11

[Amps] AC Hum On CW but Not on SSB, Bruce Osterberg, 2013/04/10

• Re: [Amps] AC Hum On CW but Not on SSB, Carl, 2013/04/10

[Amps] Basic Question Finding Passive Component Up in Smoke, john starr001, 2013/04/09

• Re: [Amps] Basic Question Finding Passive Component Up in Smoke, Vic K2VCO, 2013/04/10
  • Re: [Amps] Basic Question Finding Passive Component Up in Smoke, john starr001, 2013/04/10
• Re: [Amps] Basic Question Finding Passive Component Up in Smoke, Carl, 2013/04/10

[Amps] Look at this Custom 10kW Amp, Jerry, 2013/04/09

• Re: [Amps] Look at this Custom 10kW Amp, Richard Solomon, 2013/04/09
• Re: [Amps] Look at this Custom 10kW Amp, Drax Felton, 2013/04/09
  • Re: [Amps] Look at this Custom 10kW Amp, k3it, 2013/04/09
  • Re: [Amps] Look at this Custom 10kW Amp, R.Morris, 2013/04/09
    • Re: [Amps] Look at this Custom 10kW Amp, Bill Turner, 2013/04/10
    • Re: [Amps] Look at this Custom 10kW Amp, Richard Solomon, 2013/04/10
    • Re: [Amps] Look at this Custom 10kW Amp, Patrick, 2013/04/10
    • Re: [Amps] Look at this Custom 10kW Amp, Bill Turner, 2013/04/10
    • Re: [Amps] Look at this Custom 10kW Amp, Richard Solomon, 2013/04/10
    • Re: [Amps] Look at this Custom 10kW Amp, Patrick, 2013/04/10
    • Re: [Amps] Look at this Custom 10kW Amp, Jim Brown, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, Carl, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, Jim Brown, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, Carl, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, Jeff Blaine, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, Jim W7RY, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, donroden, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, DAVE WHITE, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, donroden, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, Carl, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, donroden, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, MU 4CX250B, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, David Jordan, 2013/04/11
    • Re: [Amps] Look at this Custom 10kW Amp, Drax Felton, 2013/04/10
• Re: [Amps] Look at this Custom 10kW Amp, Don Jones, 2013/04/10
• [Amps] Look at this Custom 10kW Amp, Jim Thomson, 2013/04/12
  • Re: [Amps] Look at this Custom 10kW Amp, Peter Voelpel, 2013/04/12
    • Message not available
    • Re: [Amps] Look at this Custom 10kW Amp, Peter Voelpel, 2013/04/12
    • Re: [Amps] Look at this Custom 10kW Amp, David Jordan, 2013/04/12

[Amps] Getting a blower out of the shack, Rick Stealey, 2013/04/09

• Re: [Amps] Getting a blower out of the shack, Chris Wilson, 2013/04/09
• Re: [Amps] Getting a blower out of the shack, Martin A Flynn, 2013/04/09
• Re: [Amps] Getting a blower out of the shack, Martin A Flynn, 2013/04/09
• Re: [Amps] Getting a blower out of the shack, Roger (K8RI), 2013/04/09
• Re: [Amps] Getting a blower out of the shack, Gary K9GS, 2013/04/09
• Re: [Amps] Getting a blower out of the shack, Carl, 2013/04/09
  • Re: [Amps] Getting a blower out of the shack, Ian White, 2013/04/10
    • Re: [Amps] Getting a blower out of the shack, Rick Stealey, 2013/04/10
    • Re: [Amps] Getting a blower out of the shack, Roger, 2013/04/13

[Amps] vacuum relay, Louis Parascondola, 2013/04/07

• Re: [Amps] vacuum relay, Jim Garland, 2013/04/07
  • Re: [Amps] vacuum relay, Jim W7RY, 2013/04/07

[Amps] Band switch, B Osburn, 2013/04/05

• Re: [Amps] Band switch, peter chadwick, 2013/04/06

[Amps] commander hf-2500 schematic, K1TTT, 2013/04/04

• Re: [Amps] commander hf-2500 schematic, Carl, 2013/04/04
• Re: [Amps] commander hf-2500 schematic, K1TTT, 2013/04/06
• Re: [Amps] commander hf-2500 schematic, K1TTT, 2013/04/07
  • Re: [Amps] commander hf-2500 schematic, Alek Petkovic, 2013/04/07
    • Re: [Amps] commander hf-2500 schematic, Bob K6UJ, 2013/04/07

[Amps] 425 amp, k8leewmm, 2013/04/03

• Re: [Amps] 425 amp, MU 4CX250B, 2013/04/03
• [Amps] 425 amp, k8leewmm, 2013/04/03
• Re: [Amps] 425 Amp, Andy Cook, G4PIQ, 2013/04/04
  • Re: [Amps] 425 Amp, Jim Brown, 2013/04/04

Re: [Amps] original thread: Peter Dahl transformers, remark about capacitors for switching supplies, Gene May, 2013/04/03

• Re: [Amps] original thread: Peter Dahl transformers, remark about capacitors for switching supplies, Vic K2VCO, 2013/04/03
  • Re: [Amps] original thread: Peter Dahl transformers, remark about capacitors for switching supplies, Bill Turner, 2013/04/03
    • Re: [Amps] original thread: Peter Dahl transformers, remark about capacitors for switching supplies, Carl, 2013/04/03
    • Re: [Amps] original thread: Peter Dahl transformers, remark about capacitors for switching supplies, Steve Bookout, 2013/04/03
    • Re: [Amps] original thread: Peter Dahl transformers, remark about capacitors for switching supplies, Bill Turner, 2013/04/03
    • Re: [Amps] original thread: Peter Dahl transformers, remark about capacitors for switching supplies, Carl, 2013/04/04

[Amps] Triode bias issue, Wilt Barnum, 2013/04/03

• Re: [Amps] Triode bias issue, Glen Zook, 2013/04/03
• [Amps] Transformer Wanted, Carl, 2013/04/03

[Amps] Peter W. Dahl LK-800-EXT Transformer For Sale, AB5EU, 2013/04/01

• [Amps] Sold - Peter W. Dahl LK-800-EXT Transformer For Sale, AB5EU, 2013/04/03