could be a bad tube, Bob I fix these amps. Lou W1QJ
-----Original Message-----
From: David Robbins <k1ttt@verizon.net>
To: amps <amps@contesting.com>
Sent: Tue, May 14, 2013 1:32 pm
Subject: Re: [Amps] Command Technologies VHF 1200
assuming that is similar to their other amps, check the control board for
probably a 1a fuse and make sure it is still ok... that is the cathode return
fuse that blows in case of a tube arc or power supply fault. if it is blown
replace it and then carefully try turning it on and tuning up. those fuses can
blow if it isn't tuned properly making the plate current high for too long. if
it still trips then characterize the 'trip'... is it the main fuse, the control
board fuse, or grid protection that is 'tripping'.
May 14, 2013 01:23:03 PM, rja12@comcast.net wrote:
Hi all,
Found one of these at a tiny fest in upstate, NY.......real cheap,
but it has a problem. The owner told me it trips whenever drive is applied.
I'm thinking it could be something north of the amp.......tuner, coax,
antenna.....something that can't handle QRO. I got to pull the cover and it
passed the visual and sniff test.
Once I enlist my wifes help (I'm still recovering from abdominal
reconstructive surgery and can't lift that much weight) to get it in the
house, I'll try it with my 2KW Bird Dummy load and see what happens. Hope
the 3CX800 isn't smoked.
Anyone have any experience with these amps?
Tnx & 73,
Bob
N2OAM
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|