Amps
[Top] [All Lists]

Re: [Amps] Using old amps on WARC query

To: amps@contesting.com
Subject: Re: [Amps] Using old amps on WARC query
From: Kevin Stover <kevin.stover@mediacombb.net>
Date: Sun, 30 Jun 2013 07:44:32 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
If I'm not mistaken the Titan, model 425, was designed "WARC ready".
It needed a mod to make it work above 23MHz but you say the mod has been done.

On 6/30/2013 6:39 AM, Charles Harpole wrote:
Please anyone can tell me the factors to consider, including burning tank 
components, when operating old linear amplifiers on the WARC bands, especially 
12 meters.
Alpha 76 PAC meaning the 3 tube version.
TenTec Titan One
Dentron DTR-2000
ICOM IC-2KL
All these amps have factory-type conversions to TEN meters already done. The Alpha has the swamping input taken out. Other than that, all amps are stock. Thanks for all specific info... 73,

Charles Harpole
k4vud@hotmail.com
                                        
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>