So how about it Ed? Those baluns turned to dust yet?
Interested minds want to know ......
wa3jpy
----- Original Message -----
From: "Carl" <km1h@jeremy.mv.com>
To: "Ed K0KL" <edk0kl@centurytel.net>; <amps@contesting.com>
Sent: Friday, July 26, 2013 4:44 PM
Subject: Re: [Amps] Glass Tape
Glass tape usually turns to dust in UV sunlight.
Carl
KM1H
----- Original Message -----
From: "Ed K0KL" <edk0kl@centurytel.net>
To: <amps@contesting.com>
Sent: Friday, July 26, 2013 3:35 PM
Subject: [Amps] Glass Tape
I purchased a few rolls of glass tape when making my own baluns. It is
both an
insulator and keeps the lacquer covering on the wire from chaffing on the
ferrite
core.
Think fiberglass thread woven into a strip of fabric. In the case cited,
I used it on
each end to make certain the resistor was centered on the screw.
73
ed K0KL
_______________________________________________
07/26/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|