Amps
[Top] [All Lists]

Re: [Amps] testing the biggest one

To: "Mike Manship" <mjmanship@iquest.net>, <amps@contesting.com>
Subject: Re: [Amps] testing the biggest one
From: "Jeff Blaine" <keepwalking188@yahoo.com>
Date: Fri, 2 Aug 2013 21:27:49 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Jim may have one of those on-line now.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- From: Mike Manship
Sent: Friday, August 02, 2013 7:13 PM
To: amps@contesting.com
Subject: Re: [Amps] testing the biggest one

Whatever happened to the X-2159?

http://www.cpii.com/docs/datasheets/81/8974.pdf

73 de Mike W9OJ







On 8/2/2013 3:09 PM, John Lyles wrote:
I just concluded 3 days of observing the final testing of a new tetrode in the French Thales (former Thomson) factory. I can say with first hand experience that tubes will be around for a long time, at least at the power levels that make sense for them. I'm not talking about broadcast or even communication levels, but for industrial and scientific sources. This posting may not be directly applicable to amateur amplifiers, but to amplifier technology in general. On Monday the TH628 ran 600 kW key down. That's with plate power of 12.2 kV Ep at 85 amps! This was up at 200 MHz. In an amplifier smaller than the car I drive. I'd love to know of any other technology capable of this at comparable size, cost and efficiency. The perfection of the art and skill of making thermionic devices is evident here. "Awesome" is all I can think..

On Tuesday, the same amp ran up to 3 MW pulsed with 26 kV at 175 amps plate current very linearly, 66% efficient and> 14 db gain in grounded grid(s) configuration.

It gets shipped to us in USA for further testing in our PA in the southwest. There will be 2 more like this in coming months to test and install. I'm happy to be back home but have to say that time in a big tube factory dispels any notions that I continuously hear on this forum and other places (broadcasters or scientists) that tubes are gone, going,& dead end now. I challenge the same pundits to come up with a superior way to generate RF power. Maybe in the sun?

Sorry that this isn't directly applicable to our ham discussions here but as amplifier builders it is more than of "academic interest", being real hardware.
73 K5PRO
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>