Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] WTB: Matched pair of 8122 or 8122W's

from [Carl] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] WTB: Matched pair of 8122 or 8122W's
From: "Carl" <km1h@jeremy.mv.com>
Date: Thu, 19 Sep 2013 15:12:21 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Burle and Eimac preferred, NOS in sealed boxes or guaranteed good, full output used OK with no screen current drift. 

RCA's must have stable screen current, NOS or used, no 60's date codes.

To be used in a fully rebuilt NCL-2000.

Carl
KM1H 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] SMPS use in tube based amps, Tomm V Aldridge
Next by Date:  Re: [Amps] Direct rectification of AC mains to derive the amp, VDD, supply, Roger (K8RI)
Previous by Thread:  Re: [Amps] Direct rectification of AC mains to derive the amp, VDD, supply, Jim Brown
Next by Thread:  Re: [Amps] WTB: Matched pair of 8122 or 8122W's, Randall, Randy
Indexes:  [Date] [Thread] [Top] [All Lists]