Thats a bit too close for even a 1200W amp. Might be fine for something in
the SB-200/AL-80 size amp.
Size the fuse at 2 to 2.5 times the actual peak current, not steady state
key down.
Carl
KM1H
----- Original Message -----
From: "Pete Smith N4ZR" <n4zr@contesting.com>
To: <amps@contesting.com>
Sent: Sunday, October 06, 2013 10:30 AM
Subject: [Amps] high voltage fuses
For what it's worth, I see that there are a lot of inexpensive 5KV
0.75-1.0 amp glass fuses listed on ebay for microwave oven use. I assume
these would also work in a legal ham amp?
--
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3222/6227 - Release Date: 10/06/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|