Re: [Amps] GS23B Plate load resistance for HF / audio analogy, peter chadwick, 2013/10/31

• Re: [Amps] GS23B Plate load resistance for HF / audio analogy, Leigh Turner, 2013/10/31
  • Re: [Amps] GS23B Plate load resistance for HF / audio analogy, Bill Turner, 2013/10/31

[Amps] Large Variac controlling HV power supply, Dave Trainor, 2013/10/30

• Re: [Amps] Large Variac controlling HV power supply, Mark Beckwith, 2013/10/31
  • Re: [Amps] Large Variac controlling HV power supply, Vic K2VCO, 2013/10/31
• Re: [Amps] Large Variac controlling HV power supply, peter chadwick, 2013/10/31
  • Re: [Amps] Large Variac controlling HV power supply, David Jordan, 2013/10/31
  • Re: [Amps] Large Variac controlling HV power supply, Carl, 2013/10/31

[Amps] odd problem with Henry 5K, Louis Parascondola, 2013/10/30

• Re: [Amps] odd problem with Henry 5K, Gary K9GS, 2013/10/31
  • Re: [Amps] odd problem with Henry 5K, KA4INM, 2013/10/31

[Amps] Small mystery, Vic K2VCO, 2013/10/29

• Re: [Amps] Small mystery, Steven Katz, 2013/10/29
  • Re: [Amps] Small mystery, Paul Christensen, 2013/10/29
    • Re: [Amps] Small mystery, Vic K2VCO, 2013/10/29
    • Re: [Amps] Small mystery, Jim W7RY, 2013/10/30
  • Re: [Amps] Small mystery, Vic K2VCO, 2013/10/29
• Re: [Amps] Small mystery, peter chadwick, 2013/10/29

[Amps] GS23B Plate load resistance for HF, Dave Trainor, 2013/10/28

• Re: [Amps] GS23B Plate load resistance for HF, Carel, pc5m, 2013/10/28
  • Re: [Amps] GS23B Plate load resistance for HF, Dave Trainor, 2013/10/29
  • Re: [Amps] GS23B Plate load resistance for HF, Bill Turner, 2013/10/30
    • Message not available
    • Re: [Amps] GS23B Plate load resistance for HF, Bill Turner, 2013/10/30
    • Re: [Amps] GS23B Plate load resistance for HF, Jeff Blaine, 2013/10/30
    • Re: [Amps] GS23B Plate load resistance for HF, Peter Voelpel, 2013/10/30
    • Re: [Amps] GS23B Plate load resistance for HF, k7fm, 2013/10/31
    • Re: [Amps] GS23B Plate load resistance for HF, Bill Turner, 2013/10/31
    • Re: [Amps] GS23B Plate load resistance for HF, Bill Turner, 2013/10/31
    • Re: [Amps] GS23B Plate load resistance for HF, Carl, 2013/10/31
    • Re: [Amps] GS23B Plate load resistance for HF, Ian White, 2013/10/31
    • Re: [Amps] GS23B Plate load resistance for HF, Dave Trainor, 2013/10/31
    • Re: [Amps] GS23B Plate load resistance for HF, Bill Turner, 2013/10/31
    • Re: [Amps] GS23B Plate load resistance for HF, Jeff Blaine, 2013/10/31
    • Re: [Amps] GS23B Plate load resistance for HF, Ian White, 2013/10/31
• Re: [Amps] GS23B Plate load resistance for HF, Alex Gavva, 2013/10/29
  • Re: [Amps] GS23B Plate load resistance for HF, Dave Trainor, 2013/10/29
• Re: [Amps] GS23B Plate load resistance for HF, TexasRF, 2013/10/28
• Re: [Amps] GS23B Plate load resistance for HF, TexasRF, 2013/10/31
  • Re: [Amps] GS23B Plate load resistance for HF, Jeff Blaine, 2013/10/31
    • [Amps] tarts, Bill Turner, 2013/10/31
    • Re: [Amps] tarts, drat, Charles Harpole, 2013/10/31
  • Re: [Amps] GS23B Plate load resistance for HF, Louis Parascondola, 2013/10/31
• Re: [Amps] GS23B Plate load resistance for HF, TexasRF, 2013/10/31
• Re: [Amps] GS23B Plate load resistance for HF, peter chadwick, 2013/10/31
  • Re: [Amps] GS23B Plate load resistance for HF / audio analogy, Leigh Turner, 2013/10/31

[Amps] 4CX1000A project, Vic K2VCO, 2013/10/27

• Re: [Amps] 4CX1000A project, Al Kozakiewicz, 2013/10/27
  • Re: [Amps] 4CX1000A project, Vic K2VCO, 2013/10/28
    • Re: [Amps] 4CX1000A project, Jim Garland, 2013/10/28
    • Re: [Amps] 4CX1000A project, Dave Trainor, 2013/10/28
    • Re: [Amps] 4CX1000A project, Vic K2VCO, 2013/10/28
    • [Amps] 4CX1000A blower, Radio WC6W, 2013/10/31
• Re: [Amps] 4CX1000A project, TexasRF, 2013/10/28

[Amps] HV fuses, Jim Garland, 2013/10/24

• Re: [Amps] HV fuses, Fuqua, Bill L, 2013/10/25
  • Re: [Amps] HV fuses, MU 4CX250B, 2013/10/25
    • Re: [Amps] HV fuses, Fuqua, Bill L, 2013/10/25
    • Re: [Amps] HV fuses, John G3UUT, 2013/10/25
    • Re: [Amps] HV fuses, Vic K2VCO, 2013/10/25
• Re: [Amps] HV fuses, Jim Thomson, 2013/10/27
  • Re: [Amps] HV fuses, Roger (K8RI), 2013/10/27

[Amps] Alpha PA 77 market value, edmund weber, 2013/10/23

• Re: [Amps] Alpha PA 77 market value, Carl, 2013/10/23

[Amps] CDE MIN02-002 series capacitors in small quantities, Conrad Farlow, 2013/10/23

• Re: [Amps] CDE MIN02-002 series capacitors in small quantities, Conrad Farlow, 2013/10/24

[Amps] Henry 2002, Joe Barnes, 2013/10/22

• Re: [Amps] Henry 2002, Paul Christensen, 2013/10/22
• Re: [Amps] Henry 2002, Mike & Becca Krzystyniak, 2013/10/22
  • Re: [Amps] Henry 2002, Paul Christensen, 2013/10/22

[Amps] Screen regulation, Vic K2VCO, 2013/10/22

• Re: [Amps] Screen regulation, Carl, 2013/10/22
• Re: [Amps] Screen regulation, peter chadwick, 2013/10/22

Re: [Amps]  200-ohm tank and "un-un" in HF amp design, peter chadwick, 2013/10/22

• Re: [Amps]  200-ohm tank and "un-un" in HF amp design, peter chadwick, 2013/10/24

[Amps] minimum length of 1:1 transmission line balun ?, Carel, pc5m, 2013/10/22

• Re: [Amps] minimum length of 1:1 transmission line balun ?, Larry Benko, 2013/10/22

[Amps] 200-ohm tank and "un-un" in HF amp design, Jim Thomson, 2013/10/22

• [Amps] 200-ohm tank and "un-un" in HF amp design, Jim Thomson, 2013/10/24

[Amps] Alpha 77D likes to remain on, Gary Smith, 2013/10/22

• Re: [Amps] Alpha likes to remain on, Charles Harpole, 2013/10/22
  • Re: [Amps] Alpha likes to remain on, Dave Hachadorian, 2013/10/22
  • Re: [Amps] Alpha likes to remain on, Gary Smith, 2013/10/22

[Amps] Microwave oven door glass - shielding?, Jim Barber, 2013/10/21

• Re: [Amps] Microwave oven door glass - shielding?, KA4INM, 2013/10/21
  • Re: [Amps] Microwave oven door glass - shielding?, Jim Barber, 2013/10/22
    • Re: [Amps] Microwave oven door glass - shielding?, Roger (K8RI), 2013/10/22

[Amps] Alpha 77dx switch, Dan Hearn, 2013/10/21

• Re: [Amps] Alpha 77dx switch, Paul Christensen, 2013/10/21
• [Amps] Alpha 77dx switch, Dan Hearn, 2013/10/22

[Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Thomson, 2013/10/21

• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim W7RY, 2013/10/21
• [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Thomson, 2013/10/22
  • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Peter Voelpel, 2013/10/22
• [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Thomson, 2013/10/22
• [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Thomson, 2013/10/22

[Amps] Alpha 77DX, Dan Hearn, 2013/10/20

• Re: [Amps] Alpha 77DX, George, 2013/10/20

[Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Barber, 2013/10/20

• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim W7RY, 2013/10/20
  • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jeff Blaine, 2013/10/20
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Louis Parascondola, 2013/10/20
• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Bill Turner, 2013/10/20
  • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Larry Benko, 2013/10/20
• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Barber, 2013/10/20
  • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim W7RY, 2013/10/20
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Vic K2VCO, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim W7RY, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Vic K2VCO, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Barber, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Peter Voelpel, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Barber, 2013/10/21
• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, peter chadwick, 2013/10/20
• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Manfred Mornhinweg, 2013/10/20
• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Barber, 2013/10/20
  • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Louis Parascondola, 2013/10/20
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Bill Turner, 2013/10/20
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Louis Parascondola, 2013/10/20
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Carl, 2013/10/20
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Roger (K8RI), 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Carl, 2013/10/21
• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Manfred Mornhinweg, 2013/10/21
  • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Bill Turner, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Jim Barber, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Vic K2VCO, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Carl, 2013/10/21
    • Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Carl, 2013/10/21
• Re: [Amps] 200-ohm tank and "un-un" in HF amp design?, Dennis OConnor, 2013/10/22

[Amps] YAESU VL-1000 Production De-Coder Ring, Richard Solomon, 2013/10/19

• Re: [Amps] YAESU VL-1000 Production De-Coder Ring, Joe Subich, W4TV, 2013/10/19

[Amps] Alpha 76A "hums on 160" problem resolved, Jim Barber, 2013/10/19

• Re: [Amps] Alpha 76A "hums on 160" problem resolved, Jim W7RY, 2013/10/19
  • Re: [Amps] Alpha 76A "hums on 160" problem resolved, Jim Barber, 2013/10/19
• Re: [Amps] Alpha 76A "hums on 160" problem resolved, Carl, 2013/10/19

[Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Behiels JeanPierre, 2013/10/18

• Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Dan Hearn, 2013/10/18
  • Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Roger (K8RI), 2013/10/19
• Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Mark Robinson, 2013/10/18
• Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Roger (K8RI), 2013/10/19
• Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), rejean leveille, 2013/10/19
  • Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Jim W7RY, 2013/10/19
• Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Bryan Swadener, 2013/10/19
  • Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Jim Garland, 2013/10/19
    • Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Paul Christensen, 2013/10/19
    • Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Bryan Swadener, 2013/10/19
    • Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Jim Garland, 2013/10/19
    • Re: [Amps] Keying Kenwood TL922 with Yaesu FT1000D (both old guys), Bryan Swadener, 2013/10/19

[Amps] Electrical Distribution Methods, Jim Thomson, 2013/10/18

• Re: [Amps] Electrical Distribution Methods, Chris Wilson, 2013/10/18
• Re: [Amps] Electrical Distribution Methods, Paul Christensen, 2013/10/18
• Re: [Amps] Electrical Distribution Methods, Jim Brown, 2013/10/18

[Amps] Question on by-pass capacitor TYPE, N1BUG, 2013/10/17

• Re: [Amps] Question on by-pass capacitor TYPE, N1BUG, 2013/10/19
• Re: [Amps] Question on by-pass capacitor TYPE, peter chadwick, 2013/10/17
  • Re: [Amps] Question on by-pass capacitor TYPE, Carl, 2013/10/17

[Amps] Alpha 76A - 120hz hum on 160m only, Jim Barber, 2013/10/17

• Re: [Amps] Alpha 76A - 120hz hum on 160m only, Chris Wilson, 2013/10/17
• Re: [Amps] Alpha 76A - 120hz hum on 160m only, Carl, 2013/10/17
• Re: [Amps] Alpha 76A - 120hz hum on 160m only, Fuqua, Bill L, 2013/10/17
  • Re: [Amps] Alpha 76A - 120hz hum on 160m only, Jim Barber, 2013/10/17
    • Re: [Amps] Alpha 76A - 120hz hum on 160m only, Jim Brown, 2013/10/18
    • Re: [Amps] Alpha 76A - 120hz hum on 160m only, Jim Barber, 2013/10/18
    • Re: [Amps] Alpha 76A - 120hz hum on 160m only, Carl, 2013/10/18
    • Re: [Amps] Alpha 76A - 120hz hum on 160m only, Jim Barber, 2013/10/18
• Re: [Amps] Alpha 76A - 120hz hum on 160m only, TexasRF, 2013/10/17
  • Re: [Amps] Alpha 76A - 120hz hum on 160m only, Jim Brown, 2013/10/17
• Re: [Amps] Alpha 76A - 120hz hum on 160m only, Colin Lamb, 2013/10/17
  • Re: [Amps] Alpha 76A - 120hz hum on 160m only, Jim Barber, 2013/10/17
• Re: [Amps] Alpha 76A - 120hz hum on 160m only, peter chadwick, 2013/10/18
  • Re: [Amps] Alpha 76A - 120hz hum on 160m only, Jim Garland, 2013/10/18

[Amps] TL922 band switchs, Hsu, 2013/10/16

• Re: [Amps] TL922 band switchs, Leigh Turner, 2013/10/16
  • Re: [Amps] TL922 band switchs, krishna kanakasapapathi, 2013/10/16

[Amps] Alpha 76PA to 6 Meters, rick darwicki, 2013/10/16

• Re: [Amps] Alpha 76PA to 6 Meters, Vic K2VCO, 2013/10/16
• Re: [Amps] Alpha 76PA to 6 Meters, Carl, 2013/10/16

Re: [Amps] Electrical Distribution Methods, TexasRF, 2013/10/15

• Re: [Amps] Electrical Distribution Methods, Fuqua, Bill L, 2013/10/15
• Re: [Amps] Electrical Distribution Methods, TexasRF, 2013/10/15
  • Re: [Amps] Electrical Distribution Methods, donroden, 2013/10/15
    • Re: [Amps] Electrical Distribution Methods, Bert Almemo, 2013/10/15
    • Re: [Amps] Electrical Distribution Methods, Jan Erik Holm, 2013/10/17
    • Re: [Amps] Electrical Distribution Methods, Jim Brown, 2013/10/17
• Re: [Amps] Electrical Distribution Methods, Manfred Mornhinweg, 2013/10/15
  • Re: [Amps] Electrical Distribution Methods, donroden, 2013/10/15
    • Re: [Amps] Electrical Distribution Methods, Bert Almemo, 2013/10/15
• Re: [Amps] Electrical Distribution Methods, peter chadwick, 2013/10/15
• Re: [Amps] Electrical Distribution Methods, Manfred Mornhinweg, 2013/10/15
  • Re: [Amps] Electrical Distribution Methods, Chris Wilson, 2013/10/15
  • Re: [Amps] Electrical Distribution Methods, Roger (K8RI), 2013/10/15
• Re: [Amps] Electrical Distribution Methods, peter chadwick, 2013/10/15
• Re: [Amps] Electrical Distribution Methods, peter chadwick, 2013/10/17

[Amps] More on two pin 220vac, Charles Harpole, 2013/10/14

• Re: [Amps] More on two pin 220vac, Alek Petkovic, 2013/10/14
• Re: [Amps] More on two pin 220vac, Jim Brown, 2013/10/15
  • Re: [Amps] More on two pin 220vac, Louis Parascondola, 2013/10/15
• Re: [Amps] More on two pin 220vac, Larry, 2013/10/15
  • Re: [Amps] More on two pin 220vac, Paul Christensen, 2013/10/15
    • Re: [Amps] More on two pin 220vac, Jim Garland, 2013/10/15
    • [Amps] Even More on two pin 220vac, Charles Harpole, 2013/10/15
    • Re: [Amps] Even More on two pin 220vac, MU 4CX250B, 2013/10/15
    • Message not available
    • Re: [Amps] More on two pin 220vac, oz5tg, 2013/10/15
    • Re: [Amps] More on two pin 220vac, oz5tg, 2013/10/16
    • Re: [Amps] More on two pin 220vac, Louis Parascondola, 2013/10/15
    • Re: [Amps] More on two pin 220vac, Paul Christensen, 2013/10/15
• Re: [Amps] More on two pin 220vac, Ron Youvan, 2013/10/15
  • Re: [Amps] More on two pin 220vac, donroden, 2013/10/15
• Re: [Amps] More on two pin 220vac, TexasRF, 2013/10/15
• Re: [Amps] More on two pin 220vac, peter chadwick, 2013/10/15
  • Re: [Amps] More on two pin 220vac, Fuqua, Bill L, 2013/10/15
    • Re: [Amps] More on two pin 220vac, Fuqua, Bill L, 2013/10/15
  • [Amps] Electrical Distribution Methods, Paul Christensen, 2013/10/15
    • Re: [Amps] Electrical Distribution Methods, qrv@kd4e.com, 2013/10/15
    • Re: [Amps] Electrical Distribution Methods, donroden, 2013/10/15
    • Re: [Amps] Electrical Distribution Methods, Fuqua, Bill L, 2013/10/15
• Re: [Amps] More on two pin 220vac, Manfred Mornhinweg, 2013/10/15
  • Re: [Amps] More on two pin 220vac, Mike McCarthy, W1NR, 2013/10/15
    • Re: [Amps] More on two pin 220vac, Bert Almemo, 2013/10/15

[Amps] query re no-ground AC wall socket and amp, Charles Harpole, 2013/10/14

• Re: [Amps] query re no-ground AC wall socket and amp, Jim Brown, 2013/10/14
• Re: [Amps] query re no-ground AC wall socket and amp, TexasRF, 2013/10/14

[Amps] repair of older Command Tech VHF-2000 amp, Louis Parascondola, 2013/10/14

• Re: [Amps] repair of older Command Tech VHF-2000 amp, Mark Bitterlich, 2013/10/14
  • Re: [Amps] repair of older Command Tech VHF-2000 amp, Carl, 2013/10/14
    • Re: [Amps] repair of older Command Tech VHF-2000 amp, Mark Bitterlich, 2013/10/14
    • Re: [Amps] repair of older Command Tech VHF-2000 amp, Carl, 2013/10/14
• Re: [Amps] repair of older Command Tech VHF-2000 amp, Jim W7RY, 2013/10/14
• Re: [Amps] repair of older Command Tech VHF-2000 amp, peter chadwick, 2013/10/14
  • Re: [Amps] repair of older Command Tech VHF-2000 amp, donroden, 2013/10/14
  • Re: [Amps] repair of older Command Tech VHF-2000 amp, Carl, 2013/10/14
    • Re: [Amps] repair of older Command Tech VHF-2000 amp, gdaught6, 2013/10/15
    • Re: [Amps] repair of older Command Tech VHF-2000 amp, KA4INM, 2013/10/15
• Re: [Amps] repair of older Command Tech VHF-2000 amp, Manfred Mornhinweg, 2013/10/15
  • Re: [Amps] repair of older Command Tech VHF-2000 amp, Vic K2VCO, 2013/10/15

[Amps] [amps] Thailand AC Power and Plugs, Gregory Beat, 2013/10/14

• Re: [Amps] [amps] Thailand AC Power and Plugs, Charles Harpole, 2013/10/14

[Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Jim Thomson, 2013/10/14

• Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Chris Wilson, 2013/10/14
  • Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Louis Parascondola, 2013/10/14
    • Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Chris Wilson, 2013/10/14
• Message not available
  • [Amps] Fwd: Ameritron AL-82/1200/1500 amps mis-wired!, Louis Parascondola, 2013/10/14
    • [Amps] Other query Ameritron AL-82/1200/1500 amps mis-wired!, Charles Harpole, 2013/10/14
    • Re: [Amps] Fwd: Ameritron AL-82/1200/1500 amps mis-wired!, Alek Petkovic, 2013/10/14
• [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Jim Thomson, 2013/10/14
  • Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Jim W7RY, 2013/10/14
    • Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Chris Wilson, 2013/10/14
    • Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Carl, 2013/10/14
    • Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Réjean Léveillé, 2013/10/14

[Amps] AL-800H transformer, Paul Decker, 2013/10/12

• Re: [Amps] AL-800H transformer, Carl, 2013/10/12
• Re: [Amps] AL-800H transformer, Jim W7RY, 2013/10/12
• Re: [Amps] AL-800H transformer, Manfred Mornhinweg, 2013/10/13
  • Re: [Amps] AL-800H transformer, Carl, 2013/10/13
    • Re: [Amps] AL-800H transformer, Manfred Mornhinweg, 2013/10/14

[Amps] Kenwood TL-922A forsale, Carl, 2013/10/12

• [Amps] SB-1000 upgrade questions, Mike & Becca Krzystyniak, 2013/10/12

[Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Louis Parascondola, 2013/10/12

• Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, WA3GIN, 2013/10/12
• Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Bill Turner, 2013/10/12
  • Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Jim W7RY, 2013/10/12
    • Re: [Amps] Ameritron AL-82/1200/1500 amps mis-wired!, Bill Turner, 2013/10/12

[Amps] some amplifier items for sale, Hsu, 2013/10/10

• Re: [Amps] some amplifier items for sale, Hsu, 2013/10/10

[Amps] Alpha PA-76A bleeder/equalizer resistors, Jim Thomson, 2013/10/10

• Re: [Amps] Alpha PA-76A bleeder/equalizer resistors, Jim Barber, 2013/10/10
• Re: [Amps] Alpha PA-76A bleeder/equalizer resistors, Carl, 2013/10/10
• [Amps] Alpha PA-76A bleeder/equalizer resistors, Jim Thomson, 2013/10/11

[Amps] Alpha PA-76A bleeder/equalizer resistors, Jim Barber, 2013/10/09

• Re: [Amps] Alpha PA-76A bleeder/equalizer resistors, Carl, 2013/10/09
  • Re: [Amps] Alpha PA-76A bleeder/equalizer resistors, Jim Barber, 2013/10/09

[Amps] Regulations, peter chadwick, 2013/10/09

• Re: [Amps] Regulations, Roger (K8RI), 2013/10/09
• Re: [Amps] Regulations, peter chadwick, 2013/10/09
  • Re: [Amps] Regulations, Roger (K8RI), 2013/10/09
• Re: [Amps] Regulations, peter chadwick, 2013/10/09
  • Re: [Amps] Regulations, qrv@kd4e.com, 2013/10/09
    • Re: [Amps] Regulations, Roger (K8RI), 2013/10/09
    • Re: [Amps] Regulations, Carl, 2013/10/09
    • Re: [Amps] Regulations, qrv@kd4e.com, 2013/10/09
    • Re: [Amps] Regulations, Alek Petkovic, 2013/10/09
    • Re: [Amps] Regulations, qrv@kd4e.com, 2013/10/09
    • Re: [Amps] Regulations, Roger (K8RI), 2013/10/09
  • Re: [Amps] Regulations, Roger (K8RI), 2013/10/09
    • Re: [Amps] Regulations, Alex Eban, 2013/10/11
  • Re: [Amps] Regulations, Paul, 2013/10/10
• Re: [Amps] Regulations, peter chadwick, 2013/10/11

Re: [Amps]  LF oscillation caused by defective plate choke?, peter chadwick, 2013/10/09

• Re: [Amps]  LF oscillation caused by defective plate choke?, Jim Thomson, 2013/10/09
  • Re: [Amps]  LF oscillation caused by defective plate choke?, Vic K2VCO, 2013/10/09
    • Re: [Amps]  LF oscillation caused by defective plate choke?, N1BUG, 2013/10/12
• Re: [Amps]  LF oscillation caused by defective plate choke?, peter chadwick, 2013/10/09

[Amps] LF oscillation caused by defective plate choke?, Jim Thomson, 2013/10/09

• Re: [Amps] LF oscillation caused by defective plate choke?, Carl, 2013/10/09
  • Re: [Amps] LF oscillation caused by defective plate choke?, Jim Thomson, 2013/10/10

[Amps] Clipperton-L CW-SSB switch, Larry, 2013/10/08

• Re: [Amps] Clipperton-L CW-SSB switch, Carl, 2013/10/08

[Amps] LF oscillation caused by defective plate choke?, N1BUG, 2013/10/08

• Re: [Amps] LF oscillation caused by defective plate choke?, Fuqua, Bill L, 2013/10/08
  • Re: [Amps] LF oscillation caused by defective plate choke?, N1BUG, 2013/10/08
• Re: [Amps] LF oscillation caused by defective plate choke?, Manfred Mornhinweg, 2013/10/08
  • Re: [Amps] LF oscillation caused by defective plate choke?, N1BUG, 2013/10/08
• Re: [Amps] LF oscillation caused by defective plate choke?, peter chadwick, 2013/10/09
  • Re: [Amps] LF oscillation caused by defective plate choke?, Carl, 2013/10/09
• Re: [Amps] LF oscillation caused by defective plate choke?, Manfred Mornhinweg, 2013/10/09
• Re: [Amps] LF oscillation caused by defective plate choke?, N1BUG, 2013/10/12

[Amps] From: "Manfred Mornhinweg" <manfred@ludens.cl>, Alf Pousar, 2013/10/08

• Re: [Amps] From: "Manfred Mornhinweg" <manfred@ludens.cl>, Alex Eban, 2013/10/08

[Amps] high voltage fuses, Jim Thomson, 2013/10/07

• Re: [Amps] high voltage fuses, Carl, 2013/10/07
  • Re: [Amps] high voltage fuses, Fuqua, Bill L, 2013/10/07
• Re: [Amps] high voltage fuses, Fuqua, Bill L, 2013/10/07
  • Re: [Amps] high voltage fuses, Bill Turner, 2013/10/07
    • Re: [Amps] high voltage fuses, Fuqua, Bill L, 2013/10/07

[Amps] 160M PI network Toroidal Coil, Jim Thomson, 2013/10/07

• Re: [Amps] 160M PI network Toroidal Coil, Bill Turner, 2013/10/07
• Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/07
• [Amps] 160M PI network Toroidal Coil, Jim Thomson, 2013/10/10

[Amps] eBay help to overseas shipping, Charles Harpole, 2013/10/06

• Re: [Amps] eBay help to overseas shipping, Chris Wilson, 2013/10/11

[Amps] Participate in NASA experiment, Fuqua, Bill L, 2013/10/06

• Re: [Amps] Participate in NASA experiment, n8de, 2013/10/06
  • Re: [Amps] Participate in NASA experiment, Fuqua, Bill L, 2013/10/06
• Re: [Amps] Participate in NASA experiment, Manfred Mornhinweg, 2013/10/07
  • Re: [Amps] Participate in NASA experiment, Fuqua, Bill L, 2013/10/07
  • Re: [Amps] Participate in NASA experiment, David Jordan, 2013/10/07
    • Re: [Amps] Participate in NASA experiment, n8de, 2013/10/07
  • Re: [Amps] Participate in NASA experiment, James McKellips, 2013/10/07
    • Re: [Amps] Participate in NASA experiment, qrv@kd4e.com, 2013/10/07
  • Message not available
    • Re: [Amps] Participate in NASA experiment, Manfred Mornhinweg, 2013/10/07
    • Re: [Amps] Participate in NASA experiment, Michael Tope, 2013/10/07
  • Re: [Amps] Participate in NASA experiment, Chris Miller, 2013/10/07

[Amps] high voltage fuses, Pete Smith N4ZR, 2013/10/06

• Re: [Amps] high voltage fuses, Carl, 2013/10/06
• Re: [Amps] high voltage fuses, Manfred Mornhinweg, 2013/10/07
  • Re: [Amps] high voltage fuses, Bill Turner, 2013/10/07
    • Re: [Amps] high voltage fuses, Fuqua, Bill L, 2013/10/08
  • Re: [Amps] high voltage fuses, Carl, 2013/10/07
    • Re: [Amps] high voltage fuses, Fuqua, Bill L, 2013/10/08
• Re: [Amps] high voltage fuses, Jim Thomson, 2013/10/10
  • Re: [Amps] high voltage fuses, Bill Turner, 2013/10/10
    • Re: [Amps] high voltage fuses, Paul Christensen, 2013/10/10
    • Re: [Amps] high voltage fuses, Richard Solomon, 2013/10/10
  • Message not available
    • Message not available
    • Re: [Amps] high voltage fuses, Bill Turner, 2013/10/10
    • Re: [Amps] high voltage fuses, Vic K2VCO, 2013/10/10
    • Re: [Amps] high voltage fuses, Bill Turner, 2013/10/10
    • Re: [Amps] high voltage fuses, Fuqua, Bill L, 2013/10/10
    • Re: [Amps] high voltage fuses, Ian White, 2013/10/11
• Re: [Amps] high voltage fuses, Jim Thomson, 2013/10/10
  • Re: [Amps] high voltage fuses, Carl, 2013/10/10
• Re: [Amps] high voltage fuses, Jim Thomson, 2013/10/11
  • Re: [Amps] high voltage fuses, Bill Turner, 2013/10/11
    • Re: [Amps] high voltage fuses, Fuqua, Bill L, 2013/10/11

[Amps] Solid state or tubes for HPAs, Ignacy Misztal, 2013/10/05

• Re: [Amps] Solid state or tubes for HPAs, Bill Turner, 2013/10/05

[Amps] 115 to 220 VAC, Paul Decker, 2013/10/05

• Re: [Amps] 115 to 220 VAC, donroden, 2013/10/05

[Amps] Power factor correction, Manfred Mornhinweg, 2013/10/05

• Re: [Amps] Power factor correction, Alex Eban, 2013/10/07

[Amps] Direct rectification of AC mains to drive the amp,, Jim Thomson, 2013/10/05

• [Amps] Direct rectification of AC mains to drive the amp,, Jim Thomson, 2013/10/07

[Amps] HL-1.5Kfx Band Data Cable for Ten Tecs, Jim Koshmider, 2013/10/05

• Re: [Amps] HL-1.5Kfx Band Data Cable for Ten Tecs, Joe Subich, W4TV, 2013/10/05

[Amps] 160M PI network Toroidal Coil, Paul Baldock, 2013/10/04

• Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/05
  • Re: [Amps] 160M PI network Toroidal Coil, Jim W7RY, 2013/10/05
  • Re: [Amps] 160M PI network Toroidal Coil, Louis Parascondola, 2013/10/05
    • Re: [Amps] 160M PI network Toroidal Coil, Bill Turner, 2013/10/05
• Re: [Amps] 160M PI network Toroidal Coil, TexasRF, 2013/10/05
• Re: [Amps] 160M PI network Toroidal Coil, Manfred Mornhinweg, 2013/10/05
• Re: [Amps] 160M PI network Toroidal Coil, Mike Waters, 2013/10/05
  • Message not available
    • Re: [Amps] 160M PI network Toroidal Coil, Paul Baldock, 2013/10/05
• Re: [Amps] 160M PI network Toroidal Coil, Bryan Swadener, 2013/10/05
  • Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/05
    • Re: [Amps] 160M PI network Toroidal Coil, George, 2013/10/06
    • Re: [Amps] 160M PI network Toroidal Coil, Roger (K8RI), 2013/10/06
    • Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/06
• Re: [Amps] 160M PI network Toroidal Coil, Manfred Mornhinweg, 2013/10/05
  • Re: [Amps] 160M PI network Toroidal Coil, Bill Turner, 2013/10/05
    • Re: [Amps] 160M PI network Toroidal Coil, Peter Voelpel, 2013/10/06
    • Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/06
    • Re: [Amps] 160M PI network Toroidal Coil, Jim W7RY, 2013/10/06
    • Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/06
• Re: [Amps] 160M PI network Toroidal Coil, Manfred Mornhinweg, 2013/10/07
  • Re: [Amps] 160M PI network Toroidal Coil, Jeff Blaine, 2013/10/07
    • Re: [Amps] 160M PI network Toroidal Coil, Jeff Blaine, 2013/10/07
    • Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/07
    • Re: [Amps] 160M PI network Toroidal Coil, Manfred Mornhinweg, 2013/10/08
• Re: [Amps] 160M PI network Toroidal Coil, peter chadwick, 2013/10/08
  • Re: [Amps] 160M PI network Toroidal Coil, Manfred Mornhinweg, 2013/10/08
• Re: [Amps] 160M PI network Toroidal Coil, peter chadwick, 2013/10/08
  • Re: [Amps] 160M PI network Toroidal Coil, Tom Thompson, 2013/10/08
  • Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/08
  • Re: [Amps] 160M PI network Toroidal Coil, Manfred Mornhinweg, 2013/10/08
• Re: [Amps] 160M PI network Toroidal Coil, peter chadwick, 2013/10/09
  • Re: [Amps] 160M PI network Toroidal Coil, Karl-Arne Markström, 2013/10/09
  • Re: [Amps] 160M PI network Toroidal Coil, Carl, 2013/10/09
• Re: [Amps] 160M PI network Toroidal Coil, peter chadwick, 2013/10/09
• Re: [Amps] 160M PI network Toroidal Coil, Manfred Mornhinweg, 2013/10/09

[Amps] Solid state or tubes for HPAs, John Lyles, 2013/10/04

• Re: [Amps] Solid state or tubes for HPAs, Manfred Mornhinweg, 2013/10/05

[Amps] Plate Transformer Supplier, Jim W7RY, 2013/10/04

• [Amps] Plate Transformer Supplier, Jim W7RY, 2013/10/16
  • Re: [Amps] Plate Transformer Supplier, Bob Gibson, 2013/10/17
  • Re: [Amps] Plate Transformer Supplier, Jim W7RY, 2013/10/17
    • Re: [Amps] Plate Transformer Supplier, Carl, 2013/10/18
    • [Amps] Peter Dahl Plate Transformer available, george, 2013/10/18

[Amps] Tune cap at minimum, Dave Hachadorian, 2013/10/04

• Re: [Amps] Tune cap at minimum, Glen Zook, 2013/10/04
  • Re: [Amps] Tune cap at minimum, Carl, 2013/10/04
• Re: [Amps] Tune cap at minimum, Jim Thomson, 2013/10/05
• Re: [Amps] Tune cap at minimum, TexasRF, 2013/10/05

[Amps] Has this SMPS got too much ripple for a SS bias supply?, Chris Wilson, 2013/10/02

• Re: [Amps] Has this SMPS got too much ripple for a SS bias supply?, Randall, Randy, 2013/10/03
  • Re: [Amps] Has this SMPS got too much ripple for a SS bias supply?, Chris Wilson, 2013/10/03
• Re: [Amps] Has this SMPS got too much ripple for a SS bias supply?, Steve Thompson, 2013/10/03

[Amps] Plate modulation from power supply ripple?, Markku Oksanen, 2013/10/02

• Re: [Amps] Plate modulation from power supply ripple?, Ron Youvan, 2013/10/03
• Re: [Amps] Plate modulation from power supply ripple?, Gary Schafer, 2013/10/03
  • Re: [Amps] Plate modulation from power supply ripple?, Markku Oksanen, 2013/10/03
    • Re: [Amps] Plate modulation from power supply ripple?, Fuqua, Bill L, 2013/10/04
• Re: [Amps] Plate modulation from power supply ripple?, TexasRF, 2013/10/04
  • Re: [Amps] Plate modulation from power supply ripple?, Gary Schafer, 2013/10/04
• Re: [Amps] Plate modulation from power supply ripple?, peter chadwick, 2013/10/04
• Re: [Amps] Plate modulation from power supply ripple?, TexasRF, 2013/10/04
• Re: [Amps] Plate modulation from power supply ripple?, TexasRF, 2013/10/04
  • Re: [Amps] Plate modulation from power supply ripple?, Gary Schafer, 2013/10/04
    • Re: [Amps] Plate modulation from power supply ripple?, Markku Oksanen, 2013/10/04
    • Re: [Amps] Plate modulation from power supply ripple?, Fuqua, Bill L, 2013/10/04
• Re: [Amps] Plate modulation from power supply ripple?, TexasRF, 2013/10/04
• Re: [Amps] Plate modulation from power supply ripple?, Jim Thomson, 2013/10/05
• Re: [Amps] Plate modulation from power supply ripple?, TexasRF, 2013/10/05
  • Re: [Amps] Plate modulation from power supply ripple?, Jim Thomson, 2013/10/05
    • Re: [Amps] Plate modulation from power supply ripple?, Fuqua, Bill L, 2013/10/05
• Re: [Amps] Plate modulation from power supply ripple?, Manfred Mornhinweg, 2013/10/05
• Re: [Amps] Plate modulation from power supply ripple?, peter chadwick, 2013/10/05

[Amps] Direct rectification of AC mains to drive the amp,, Jim Thomson, 2013/10/02

• Re: [Amps] Direct rectification of AC mains to drive the amp,, Manfred Mornhinweg, 2013/10/05
• Re: [Amps] Direct rectification of AC mains to drive the amp,, peter chadwick, 2013/10/05
  • Re: [Amps] Direct rectification of AC mains to drive the amp,, Bill Turner, 2013/10/05
  • Re: [Amps] Direct rectification of AC mains to drive the amp,, Alex Eban, 2013/10/07
    • Re: [Amps] Direct rectification of AC mains to drive the amp,, Alf Pousar, 2013/10/07
    • Re: [Amps] Direct rectification of AC mains to drive the amp,, Alex Eban, 2013/10/08
• Re: [Amps] Direct rectification of AC mains to drive the amp,, Manfred Mornhinweg, 2013/10/05
  • Re: [Amps] Direct rectification of AC mains to drive the amp,, Bill Turner, 2013/10/06
  • Re: [Amps] Direct rectification of AC mains to drive the amp,, Bill Turner, 2013/10/06
  • Re: [Amps] Direct rectification of AC mains to drive the amp,, Alex Eban, 2013/10/07
    • [Amps] Rubber Mats ( was Direct rectification of AC mains to drive the amp, ), donroden, 2013/10/07
    • Re: [Amps] Rubber Mats ( was Direct rectification of AC mains to drive the amp, ), Ron Youvan, 2013/10/07
    • Re: [Amps] Rubber Mats ( was Direct rectification of AC mains to drive the amp, ), Steve Bookout, 2013/10/07
    • Re: [Amps] Rubber Mats ( was Direct rectification of AC mains to drive the amp, ), Ken Durand, 2013/10/07
    • Re: [Amps] Rubber Mats ( was Direct rectification of AC mains to drive the amp, ), Alex Eban, 2013/10/08
    • Re: [Amps] Rubber Mats ( was Direct rectification of AC mains to drive the amp, ), Alex Eban, 2013/10/08
  • Re: [Amps] Direct rectification of AC mains to drive the amp,, Alex Eban, 2013/10/07
• Re: [Amps] Direct rectification of AC mains to drive the amp,, Manfred Mornhinweg, 2013/10/06
  • Re: [Amps] Direct rectification of AC mains to drive the amp,, Bill Turner, 2013/10/06
• Re: [Amps] Direct rectification of AC mains to drive the amp,, Manfred Mornhinweg, 2013/10/07