That is unfortunately not correct. I used to live in Sweden and the
distribution system there was 3-phase 380V and approx. 220 between one phase
and ground.
Nowadays it's changed to a 3-phase system with 400V and approx. 230v for one
phase.
73 Bert, VE3NR
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of
donroden@hiwaay.net
Sent: Tuesday, October 15, 2013 12:21 PM
To: amps@contesting.com
Subject: Re: [Amps] Electrical Distribution Methods
Quoting TexasRF@aol.com:
> I assume this is also the reason that 240v three phase systems have
> 208vac between legs?
No........... 240Volt 3 phase has 240 between legs.
208 three phase has 208 between legs.
Don W4DNR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|