Amps
[Top] [All Lists]

Re: [Amps] Electrical Distribution Methods

To: amps@contesting.com
Subject: Re: [Amps] Electrical Distribution Methods
From: Chris Wilson <chris@chriswilson.tv>
Date: Fri, 18 Oct 2013 12:32:59 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
On Fri, 18 Oct 2013 04:16:38 -0700, you wrote:


>##  In the UK you have both an UN balanced primary....and  an UN balanced sec. 
>    The grnded
>side of the pri..is bonded to the grnded side of the sec.   Same deal, if a 
>pri to sec short in the xfmr
>ever happened.... u have a path for fault current..and the HV fuse simply 
>blows open.   You don?t
>want 12.5 kv or 14.4 kv or any HV  coming into the home.   
>
>Jim  VE7RF 



I would have thought you, of all people, might have liked high current
HV coming into the home? ;)

Thanks for the info re the QRO low pass filters Jim, in my post
elsewhere.

-- 

             Best Regards,
                       Chris Wilson.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>