Amps
[Top] [All Lists]

Re: [Amps] Participate in NASA experiment

To: "n8de@thepoint.net" <n8de@thepoint.net>
Subject: Re: [Amps] Participate in NASA experiment
From: "Fuqua, Bill L" <wlfuqu00@uky.edu>
Date: Sun, 6 Oct 2013 18:46:45 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
 Read the technical facts. All information you need is there.
Radio Astronomy receivers often have receivers with multiple wide bandwidth 
detectors that are very well calibrated.
This allows them to determine the power being received and to accurately 
compare the power levels between detectors.
Interferometry receivers are another story. These do cross correlations between 
signals of pairs of antennas to create
maps of radio sources. They are also wide band. 

73
Bill wa4lav

________________________________________
From: n8de@thepoint.net [n8de@thepoint.net]
Sent: Sunday, October 06, 2013 2:24 PM
To: Fuqua, Bill L
Cc: amps@contesting.com
Subject: Re: [Amps] Participate in NASA experiment

Read carefully.

It will take MINUTES to send "HI" ... and your callsign is NOT included.

This is interesting only in that it might involve ham radio.

73
Don
N8DE


Quoting "Fuqua, Bill L" <wlfuqu00@uky.edu>:

> Just received this from Tim.
> Sounds interesting. Any Ham can participate in this experiment.
> But it will take a lot of us to accomplish the goal.
> 73
> Bill wa4lav
> ________________________________________
> From: Knauer, Timothy G
> Sent: Sunday, October 06, 2013 3:53 AM
> To: Fuqua, Bill L
> Subject: FYI
>
> Don't know if there is anyone in the club that's interested.
>
>
>
> http://www.jpl.nasa.gov/hijuno/
>
>
>
> -tim
>
>
>
>
> Best Regards,
>
> Tim Knauer
> Director, MacAdam Student Observatory
> University of Kentucky
> 859-257-7147 Office
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>