Amps
[Top] [All Lists]

Re: [Amps] 200-ohm tank and "un-un" in HF amp design?

To: dezrat1242@yahoo.com, amps@contesting.com
Subject: Re: [Amps] 200-ohm tank and "un-un" in HF amp design?
From: Louis Parascondola <gudguyham@aol.com>
Date: Sun, 20 Oct 2013 19:01:19 -0400 (EDT)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
That I don't know, I'll try to see what the manual claims.


Will that unit run at full legal limit with a brick on the key? The 2-holer
version will not, and the weak link is the toroid. 

Guess how I know?   Twice.   :-)






-----Original Message-----
From: Bill Turner <dezrat1242@yahoo.com>
To: Amps <amps@contesting.com>
Sent: Sun, Oct 20, 2013 6:59 pm
Subject: Re: [Amps] 200-ohm tank and "un-un" in HF amp design?


ORIGINAL MESSAGE:          (may be snipped)

On Sun, 20 Oct 2013 18:39:37 -0400 (EDT), Louis wrote:

>THE COMMAND TECH HF-2500E THAT RUNS 3 3CX800 TUBES USES THIS UN-UN SYSTEM AND 
AT 3KW OUTPUT THERE SEEMS TO BE NO ISSUES WHATSOEVER.   Seems to be a tried and 
true design.  It's hard to argue with success like that.
>

REPLY:

Will that unit run at full legal limit with a brick on the key? The 2-holer
version will not, and the weak link is the toroid. 

Guess how I know?   Twice.   :-)

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>