Hi Gang.
I have an AL-800H transformer, it is the only HV xmfr I have left. It looks
like it will produce about 2250 VDC.
I need to use it in another project to produce around 1100VDC no load, max
1300VDC at no more than 400 mA
I was thinking I could wire the primary as 250VAC input i.e. put all primary
windings in series and supply it with 110VAC input which should drop the HV
output to less than half.
What doe the experts on here say?
thanks,
Paul,
KG7HF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|