Amps
[Top] [All Lists]

Re: [Amps] Making a broadband transformer

To: "'Bill Turner'" <dezrat1242@yahoo.com>, "'Amps'" <amps@contesting.com>
Subject: Re: [Amps] Making a broadband transformer
From: "Saandy" <alexeban@gmail.com>
Date: Wed, 6 Nov 2013 17:04:35 +0200
List-post: <amps@contesting.com">mailto:amps@contesting.com>
...try this end too
http://www.cmi-ferrite.com/
Alex    4Z5KS

-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Bill Turner
Sent: Tuesday, November 05, 2013 6:15 PM
To: Amps
Subject: Re: [Amps] Making a broadband transformer

ORIGINAL MESSAGE:          (may be snipped)

On Tue, 5 Nov 2013 09:08:07 -0600, Mike wrote:

>
>Fair-Rite P/N is 2873000202 (Amidon BN-73-202)
>
>Trouble is, I don't know if Fair-Rite makes in the size and shape you might
>need. But if they do, I'll bet #73 might work for you.
>
>73, Mike
>www.w0btu.com

REPLY:

According to Amidon's recommendations, 73 material is best below 15 MHz:

http://www.amidoncorp.com/product_images/specifications/2-03.pdf

but I will look into the binocular configuration. Thanks for the info.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>