Anyone have a clever way to add speed switching to an Ameritron, I.E have it
run on low in STBY and med or high in OPR ?
I'm thinking at least automatically from the STBY/OPR switch for Low/Med with
an option to kick it to High for RTTY contests.
Taking 30 screws out of the case is not a good option.
A three position switch on the back panel is probably easiest but would require
getting up out of my chair hi hi
Thanks
Rick, N6PE
=======================================
The only difference between a rut and a grave is the depth.
Website: http://www.qsl.net/n6pe/index.html
eBay Store: http://stores.ebay.com/N6PE-Radio-Tubes
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|