I've put 10 KW PEP (SSB) through a standard Milspec N connector attached to
RG-393. Also with L44W 1/2" Heliax connectors (solder on center pin as
well) . However, this was with a perfect match.
And for Peter .... this was not on the ham bands, so you can rest easy.
Mark
WA3JPY
----- Original Message -----
From: "Carl" <km1h@jeremy.mv.com>
To: "N1BUG" <paul@n1bug.com>; "Amps reflector" <amps@contesting.com>
Sent: Thursday, December 19, 2013 9:43 AM
Subject: Re: [Amps] "N" Connector
I run 1500W on 144, 222 and 400W on 432 thru N connectors.
The 1000W AM CARRIER (4000W PEP) 432 military cavity Ive been working on
has an N.
All Mil Spec US made of course.
Carl
KM1H
----- Original Message -----
From: "N1BUG" <paul@n1bug.com>
To: "Amps reflector" <amps@contesting.com>
Sent: Tuesday, December 17, 2013 5:34 PM
Subject: Re: [Amps] "N" Connector
They are available from many suppliers. I have been running a "healthy"
1.5 kW through them at 50 MHz for 6 or 7 years without any trouble so
far. SWR is typically 1.5:1 but has been over 2:1 with ice and snow at
times.
73,
Paul N1BUG
On 12/15/2013 12:19 PM, Col. Paul E. Cater wrote:
A few weeks ago, there was an excellent thread concerning connectors on
one
of the forums. I didn't see it mentioned so I was wondering if anyone
has
tested or subjected the 2-piece "N" connectors to trial by fire? High
Sierra is the only place I've seen them----
http://www.hamcq.com/1-n-connector-male-for-rg213-rg8-lmr400-2-parts-nconnector2parts.html
The price is reasonable.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6931 - Release Date: 12/18/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|