[Top] [All Lists]

Re: [Amps] Runaway Plate Current

Subject: Re: [Amps] Runaway Plate Current
From: Roger <>
Date: Sat, 28 Dec 2013 19:25:26 -0800
List-post: <">>
Thanks to all who replied and my apologies for double posting. It took a
while for this to get posted to the Amps Reflector so I also asked the
question on the eHam forum.

The problem was resolved by putting the screens to ground when the voltage
is removed. I have shunt resistors in place on each socket but the
impedance was not enough to prevent the oscillation.

Once again, thanks for the responses. I've learned a lot from this

73, Roger
Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>