No, the breaker was OK. I have a 20A breaker on the amp, a 25A one on
the wall of the shack, and a 30A one at the service entrance. All three
opened up properly. But the relay that controls the primary of the
transformer stuck shut.
On 2/23/2014 5:29 PM, Tom Osborne wrote:
On 2/23/2014 8:23 AM, Fuqua, Bill L wrote:
I always liked the front panel circuit breaker on commercial
equipment that
is a sure fire way to remove all power in the instrument, except the
line going to
the breaker from the external power cord.
73
Bill wa4lav
I think that he said a 30 amp breaker welded itself shut. Would
probably do that on a panel mounted breaker, too. 73
Tom W7WHY
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|