[Amps] 3-500Z pin becomes unsoldered

["Alf Pousar" <alf.pousar@surffi.net>]

If your solder lugs are dripping the solder due to heath, clean the lug using a 
good desolder wick and wrap the wire around and trough the lug. Then take some 
small wrapp wire and wrapp around the lug.
Then... solder with high temp ten/silver solder and the problem is gone.

Alf  OH2QM
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps