To: | amps@contesting.com |
---|---|
Subject: | Re: [Amps] Info on HP power supply |
From: | Jim Hargrave <w5ifp@gvtc.com> |
Date: | Tue, 08 Jul 2014 09:59:48 -0500 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
It readily translates to English using Google Chrome. Jim w5ifp@gvtc.com On 7/8/2014 4:29 AM, PA3CSG wrote: Hello! I don know if this is exactly the same power supply. Please check: http://elweb.info/dokuwiki/doku.php?id=hp_3kw_netzteil_als_lader and http://www.inexess.com/bilder/hp3kwlader/poti_xx_zur_spannungsjustage.jpg Unfortunately this is in German. Kind regards, Geert PA3CSG op 08-07-14 09:33, Markku Oksanen schreef:HiI am going to use these same PSU, looked extensively on the WEB to no avail.If you find the documentations, please share! I saw plenty of pages where the connections were reverse engineered so the PSU works but no ideas about adjusting voltage which I could use also.Thanks! MarkkuWW1C/OH2RA/OG2ADate: Mon, 7 Jul 2014 16:48:19 -0700 From: dezrat@outlook.com To: amps@contesting.com Subject: [Amps] Info on HP power supplyLooking for schematic and/or operating manual for the HP 48V 3000W power supply, model 226519-001 (one of the ESP120 series). I have the pinoutsfor connecting and powering up but am looking for documentation on thewhole thing. These are available all over the internet, but can not findany more than pinouts. HP support is no help. This info must be available somewhere. Anyone know where? Thanks, 73, Bill W6WRT dezrat@outlook.com _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Amps] Mixed lot of air variables (and a lone roller inductor), George Watson |
---|---|
Next by Date: | Re: [Amps] Info on HP power supply, Chris Wilson |
Previous by Thread: | Re: [Amps] Info on HP power supply, Onder Arda |
Next by Thread: | Re: [Amps] Info on HP power supply, Chris Wilson |
Indexes: | [Date] [Thread] [Top] [All Lists] |