Carl,
> You can also run it in the CW position for 3dB less heat (-;
I do that, whenever I use any mode that doesn't require envelope linearity!
As I set the bias, it's class AB1, pretty close to B, in SSB position, and deep
into class C in CW position. With the manual-recommended bias setting, instead,
it's class AB1 closer to class A in SSB position, and pretty close to exact
class B in the CW position.
Works well, but the blower is too noisy!
Manfred
========================
Visit my hobby homepage!
http://ludens.cl
========================
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|