Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] Alpha 76 screws

from [Castellano, Michael (USACT)] [Permanent Link][Original]
To: "amps@contesting.com" <amps@contesting.com>
Subject: [Amps] Alpha 76 screws
From: "Castellano, Michael (USACT)" <Michael.Castellano@usdoj.gov>
Date: Mon, 8 Dec 2014 20:52:17 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
They are TRUSS head screws, usually used on sheet metal where strength is not 
as important as surface contact.

73!
Mike KM1R

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] Alpha 76 screws, Castellano, Michael (USACT) <=
Previous by Date:  [Amps] Alpha 99, Kathy Bookmiller via Amps
Next by Date:  [Amps] Time delay problem with an ALPHA 76 CAE (3tubes)., J.H Mauduit-Larive
Previous by Thread:  [Amps] Alpha 99, Kathy Bookmiller via Amps
Next by Thread:  [Amps] Time delay problem with an ALPHA 76 CAE (3tubes)., J.H Mauduit-Larive
Indexes:  [Date] [Thread] [Top] [All Lists]