Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] 5 Minutes for Ameritron 811H to warm up?

from [Jim Thomson] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] 5 Minutes for Ameritron 811H to warm up?
From: "Jim Thomson" <jim.thom@telus.net>
Date: Fri, 23 Jan 2015 03:24:38 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
Date: Fri, 23 Jan 2015 13:37:00 +0800
From: Alek Petkovic <vk6apk@bigpond.com>
To: Amplifier Mailing List <amps@contesting.com>
Subject: Re: [Amps] 5 Minutes for Ameritron 811H to warm up?

Yeah. Well that is strange. Blowed if I know what he means then.

Thanks
Alek. VK6APK

## Buy it for a song..then spend 15 mins to repair it.  What takes 5 mins to
warm up, the fils...or the B+  ??    I think the xfmr in the 811 has the fil 
winding
built into the plate xfmr.  It could be some shorted winding issue, etc.   It 
could
also be a screwed up hv meter. 

Jim   VE7RF 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] 5 Minutes for Ameritron 811H to warm up?, Alek Petkovic
Next by Date:  Re: [Amps] 5 Minutes for Ameritron 811H to warm up?, Alek Petkovic
Previous by Thread:  Re: [Amps] 5 Minutes for Ameritron 811H to warm up?, Carl
Next by Thread:  Re: [Amps] 5 Minutes for Ameritron 811H to warm up?, Alek Petkovic
Indexes:  [Date] [Thread] [Top] [All Lists]