Oddly enough, the 833A has a greater plate to cathode capacitance than plate to
grid.
The grid does not offer much shielding between the plate and cathode. You would
probably have
to neutralize it no matter how you use it, common grid or cathode. It is the
only triode tube that
I know of that is like this.
I thought it was odd and did not believe the specifications myself and
measured the interelectrode
capacitance and my measurements agreed with the specifications.
Probably best to use it common cathode and plate neutralization.
73
Bill wa4lav
________________________________________
From: Amps [amps-bounces@contesting.com] on behalf of Hsu [hsu4qro@gmail.com]
Sent: Monday, January 26, 2015 1:13 AM
To: amps@contesting.com
Subject: [Amps] 833A GG
Anyone have experience about 833 works on GG configurtion?Is it can work
10 mtrs?I just contact with the manufacturer, the factory new tube
graphite anode,only $50/ea, ,dirt cheap
Hsu
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|