To: | amps@contesting.com |
---|---|
Subject: | Re: [Amps] Topband: Elimination of Treadmill RFI on 160 meters |
From: | Jim Brown <jim@audiosystemsgroup.com> |
Reply-to: | jim@audiosystemsgroup.com |
Date: | Tue, 27 Jan 2015 23:27:15 -0800 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
On Tue,1/27/2015 10:43 PM, Gary Smith wrote: I have two Astron power supplies; a VS-35M & a RS-35M. The RS-35M has stopped working & I have to track down that issue. While I'm in there, are there any known mods I should do to either of these? Sounds like I should remove the paint under the lug and attach the green wire properly to the chassis. Yes, you should. FWIW, I do NOT recommend bonding V- to the chassis, for a number of reasons, but the Green wire absolutely SHOULD be bonded to the chassis. See k9yc.com/PowerSupplyBondingAndAudioDistortion.pdf 73, Jim K9YC _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] Topband: Elimination of Treadmill RFI on 160 meters, Gary Smith |
---|---|
Next by Date: | Re: [Amps] {Collins} Understanding Screen Current in a Tetrode, Roger (K8RI) |
Previous by Thread: | Re: [Amps] Topband: Elimination of Treadmill RFI on 160 meters, Gary Smith |
Next by Thread: | Re: [Amps] Topband: Elimination of Treadmill RFI on 160 meters, Mike Waters |
Indexes: | [Date] [Thread] [Top] [All Lists] |