[Top] [All Lists]

Re: [Amps] 3CX1200 tubes

To: "Dick Hanson" <>, <>
Subject: Re: [Amps] 3CX1200 tubes
From: "Hardy Landskov" <>
Date: Tue, 24 Mar 2015 16:41:23 -0700
List-post: <">>
Hi Dick and everyone.
Just an FYI. I have a beautiful Chicago F-725 filament transformer, 7.5 V, 25 amp that will power 3CX1200, 3-1000, and 4-1000 if anyone is needing one. I don't know what they go for but $65 + shipping would be good for me. I don't like to use the email to sell stuff but this is getting a little rare in my book. Excuse me if I offended anyone.
73 Hardy N7RT

----- Original Message ----- From: "Dick Hanson" <>
To: <>
Cc: "Amps Reflector" <>
Sent: Sunday, March 22, 2015 7:34 AM
Subject: Re: [Amps] 3CX1200 tubes

Hi Randy....

The tubes are electrically identical, but there are some things you'd want
to know if you're considering an amp.

The A7 and D7 have 'long' grid leads that internally terminate in one of the
pins on the bottom.

The Z7 and the YC229 (bigger anode version of Z7) feature a grid ring which
grounds the grid with a very short connection.
In other words, the grid ring is bolted to the chassis (so no socket
This is a good deal to help eliminate parasites.

My 2 cents.


Dick, K5AND
Austin, TX

-----Original Message-----
From: Amps [] On Behalf Of Randy
Sent: Saturday, March 21, 2015 9:30
Subject: [Amps] 3CX1200 tubes

Aside from the physical and filament differences is there much difference in RF performance between the 3CX1200A7, D7, and Z7 tubes? Is one more suited for HF SSB service (lower IMD, etc.)? If you had all three types available and wanted to build an HF SSB amp project from scratch, which of these would
be the best choice?


Randy, W7HR

Port Orchard, WA

Amps mailing list

Amps mailing list

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>