Amps
[Top] [All Lists]

[Amps] SB-220 input SWR on 10M

To: "amps@contesting.com" <amps@contesting.com>
Subject: [Amps] SB-220 input SWR on 10M
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Wed, 25 Mar 2015 10:12:24 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Recently, the input SWR of my SB-220 has gone to about 3:1 on 10 CW. I can still drive it close to full output, but it ain't right. Without much instrumentation or the smarts to go with it, I'm wondering if there is something I can do more or less blindly. Does this likely indicate a failure in one of the three capacitors in the input circuit? Would it make sense just to get replacements and put them in?
--

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] SB-220 input SWR on 10M, Pete Smith N4ZR <=