After converting an Alpha 76a to 3CPX800's with a new Peter Dahl upgraded
Transformer and installing the new upgraded RFC-3 Plate Choke I am seeing a
problem with tuning on 15 and 10 meters. All bands except 15 and 10 seem to
tune ok. On 15 and 10 meters....The tuning indicator is at 0 and it's the
best tuning I can get. For those who have completed a conversion in the past,
can you let me know if you have seen this issue before and if so, what was done
to fix the problem? I've seen some info on the net from removing stators from
the tuning cap to moving the taps on the tank coil.
Thanks for any help you can give!
Rich
Rich N7TR
ex KI3V, N3AMK, WB3JOV
www.n7tr.com<http://www.n7tr.com>
http://www.qrz.com/db/N7TR
Telnet: dxc.n7tr.com N7TR DXCluster
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|