Amps
[Top] [All Lists]

Re: [Amps] Date Code Samsung 120 MFD 450 Volt Capacitors?

To: TexasRF@aol.com
Subject: Re: [Amps] Date Code Samsung 120 MFD 450 Volt Capacitors?
From: "qrv@kd4e.com" <qrv@kd4e.com>
Reply-to: qrv@kd4e.com
Date: Mon, 11 May 2015 12:59:58 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
OK, sounds good.

I'm still trying to sort the alphanumeric label EIAJD0160:

EIA = military contract?
J = ??
D = ??
01 = 2001?
60 = ??

If 2001 they are already 14 years old - perhaps not a good
choice for this amp?

Thanks - David KD4E


> Or, if it a voltage doubler circuit, two more caps.
>  
> Gerald K5GW
>  
>  
> In a message dated 5/11/2015 10:39:27 A.M. Central Daylight Time,
> amps@contesting.com writes:
> 
>     Just put an additional 450 volt capacitor in series to increase the
>     safety factor. Glen, K9STH
> 
>     Website: http://k9sth.net
>           From: "qrv@kd4e.com" <qrv@kd4e.com>
>     To: "amps@contesting.com" <amps@contesting.com>
>     Sent: Monday, May 11, 2015 8:40 AM
>     Subject: [Amps] Date Code Samsung 120 MFD 450 Volt Capacitors?
>       
>     Would these caps be safe to use in an amp PS?
> 
>     Samsung 120 mfd  at 450 volt 105c
> 
>     Would this # EIAJD0160 reveal the date code?
> 
>     Or best not to mess with anything below 500v?
> 
>     The Clipperton L manual says 100uF @ 500v, the ones
>     in there are 125uF @ 500v.
> 
>      
>     _______________________________________________
>     Amps mailing list
>     Amps@contesting.com
>     http://lists.contesting.com/mailman/listinfo/amps
> 


-- 

*David* KD4E
ARES-EC Bulloch County, Nevils, Georgia USA

Safe & Secure Search Engine: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>