That sensible criteria Joe just about excludes all solid-sate commercial
amps that are currently in the ham-market...rather sadly :-(
Leigh
VK5KLT
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Joe Subich,
W4TV
Sent: Friday, 13 November 2015 8:06 AM
To: amps@contesting.com
Subject: Re: [Amps] SPE 1.3K-FA and FTDX-5KMP
Given SPE's own IMD test results at 1 KW PEP - not even the rated
1300 W PEP Output - I would not drive an SPE 1.3K-FA with *any*
transceiver. If an amplifier can't make at least -30 dB relative
to PEP at rated power it belongs in the garbage rather than making
garbage on the air.
73,
... Joe, W4TV
On 11/12/2015 2:23 PM, Richard Solomon wrote:
> What would folks think about running the FTDX-5KMP
> in Class A to drive the SPE Amp ?
>
> 73, Dick, W1KSZ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|