Amps
[Top] [All Lists]

Re: [Amps] Answer about heat failure

To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] Answer about heat failure
From: "Fuqua, Bill L" <wlfuqu00@uky.edu>
Date: Sun, 16 Oct 2016 20:38:11 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
    I once discovered a wet tube failure in a Mobley Buncher system.
This was a 10kW 20 MHz power generator with a regulated plate supply.
The plate supply consisted of a 3CW10000 driven by two 304TL triodes.
   It shut down fast and I was called in to fix it. The strange thing was that
the 304TL's had water in them. Apparently while the system was running
a hose sprang a water leak that sprayed the 304TL's just right so that  when
they cracked the water was sucked into them. I kept them on  a shelf in our
lab on display with other unusual failures until the water inside turned so 
murky 
that they just looked ugly. The glass never shattered.

73
Bill wa4lav
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>