“Because of this, you must be constantly grounded by a wrist strap.”
When you get really serious about static control, you make the floor conductive
and require all personnel to wear heel straps.
Standard procedure at HP microwave instrument production areas. Static damage
costs real money.
Ken K6MR
From: Bill Turner<mailto:dezrat@outlook.com>
Sent: Tuesday, April 11, 2017 3:47 PM
To: Amps group<mailto:amps@contesting.com>
Subject: Re: [Amps] blowing up CMOS
------------ ORIGINAL MESSAGE ------------(may be snipped)
On Wed, 12 Apr 2017 08:38:17 +1200, Steve wrote:
> at this point you can safely take the
>component out of the bag, AND safely put that component down on some
>conductive surface PROVIDED you bonded yourself to said surface by
>touching it first with your free hand, and so on. H
REPLY:
This method is better than nothing, but is still not adequate.
As can be demonstrated with a static meter, your body is constantly
generating static, even when seated by simple movement of your arm and
legs and even by shifting a little in the seat. Because of this, you
must be constantly grounded by a wrist strap.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|