Amps
[Top] [All Lists]

Re: [Amps] Arco 30 Series Trimmer Cap Nuts

To: Jim W7RY <jimw7ry@gmail.com>, <amps@contesting.com>
Subject: Re: [Amps] Arco 30 Series Trimmer Cap Nuts
From: Radio WC6W via Amps <amps@contesting.com>
Reply-to: Radio WC6W <wc6w_amps@yahoo.com>
Date: Sun, 30 Apr 2017 18:26:13 +0000 (UTC)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi Jim,
   Those are brass 12-40 panel (thin) nuts.

   I searched for those in vain about a decade ago.

   If you have access to a lathe, you might consider making some starting with 
3/8" brass hex stock and a 12-40 tap (rare, but not impossible to find).

73 & Good morning,
   Marv WC6W

http://qsl.net/wc6w/



--------------------------------------------
On Sat, 4/29/17, Jim W7RY <jimw7ry@gmail.com> wrote:

 Subject: [Amps] Arco 30 Series Trimmer Cap Nuts
 To: "AMPS" <amps@contesting.com>
 Date: Saturday, April 29, 2017, 11:59 AM
 
 I hope it’s okay if I post an amplifier
 related post on this forum.... :(
 
 
 Does anyone know what type of nut is
 used on an Arco 30 Series ceramic 
 compression trimmer capacitor?
 
 None of the standard (SAE) or metric
 nuts at my local hardware store work.
 
 Reference picture here:
 
 https://www.rfparts.com/304m.html
 
 Anyone have some? Need about 15 of
 them.
 
 Thanks!
 73
 Jim W7RY
 
 _______________________________________________
 Amps mailing list
 Amps@contesting.com
 http://lists.contesting.com/mailman/listinfo/amps
 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>