Amps
[Top] [All Lists]

Re: [Amps] 8877 filament

To: Amps group <amps@contesting.com>
Subject: Re: [Amps] 8877 filament
From: Bill Turner <dezrat@outlook.com>
Date: Fri, 5 May 2017 17:15:41 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
------------ ORIGINAL MESSAGE ------------(may be snipped)

On Fri, 5 May 2017 09:38:02 -0700, VE7RF wrote:

>
>##  8877 is 5 V  at 10.5 Amps.   That’s a hot resistance of  .476 ohms. 
>At just 3 volts, the current draw would likely be aprx  6.3 Amps =  18.9 watts
>And even less, if  2.5 V was used.

REPLY:

Heater resistance is not linear with temperature. You can not
calculate accurately using Ohm's law, it has to be measured. 

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>